Chapter 7: Using The Printer With Os/2 Warp; Setting Up For Printing With Os/2 Warp - Star Micronics LC-7211 User Manual

Chapter 7: Using the Printer with OS/2 Warp

This chapter contains specific information about using the printer with IBM
OS/2 Warp. It also shows you how to install the printer driver on your computer
so you can control the printer. By reading this chapter, you will learn:
How to set up for printing with IBM OS/2 Warp
How to prepare for printing
How to print a document
Important!
See the "readme. txt" file for important information that became available
after this documentation was printed.

Setting up for printing with OS/2 Warp

Before you can use the printer with OS/2 Warp, you must first perform the
following procedure to install the printer driver supplied on the 3.5" floppy disk
that comes with the printer.
Start up the OS/2 system.
Insert the floppy disk that comes with the printer into one of your
computer's disk drives.
Open the floppy in icon view.
Double click on the OS2\ENG folder.
Double click on the STARDM.DR_ file.
Drag the printer driver whose name matches the name of your printer to the
desktop.
53