GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the unit.
3. Use a screwdriver to loosen the screw.
4. Install 3 new LR44 button cell batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
5. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
•
Use three LR44 Alkaline button cell batteries only for this toy.
•
The button cell batteries used with this product should be kept away
from small children who might still put things in their mouths. If the
button cell batteries are swallowed, consult a doctor immediately.
• This product contains button cell batteries. Swallowing a button
cell battery can cause internal chemical burns in as little as two
hours and can lead to death. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate
medical attention.
•
Insert the button cell batteries with the correct polarity.
•
Do not use damaged button cell batteries.
•
Do not short-circuit the button cell battery terminals.
•
Remove exhausted button cell batteries from the product.
•
Remove button cell batteries during long periods of non-use.
•
Do not dispose of button cell batteries in fire.
•
Do not charge non-rechargeable button cell batteries.
4
Need help?
Do you have a question about the Smart Sounds Baby Keys and is the answer not in the manual?
Questions and answers