Sensor Calibration - Sensor Electronics SEC3120 Instruction And Operation Manual

*
* SAVE CHANGES

9. Sensor Calibration

Calibration Menu (Selected from the Main Menu)
* CALIBRATION
ALARM
RELAY
NETWORK
Operator Manual
SEC3120 Digital Transmitter
DATA BITS
* STOP BITS
PARITY
BAUD RATE
DATA BITS
STOP BITS
* PARITY
BAUD RATE
DATA BITS
STOP BITS
PARITY
* BAUD RATE
* PREVIOUS MENU
COMM- DEFAULT
COMM- ALTERNATE
COMM- CUSTOM
* PREVIOUS MENU
NETWORK ID MENU
MODBUS SETTINGS
PREVIOUS MENU
ABORT CHANGES
Page 26 of 40
Sensor Electronics Corporation
EIGHT
TWO *
NONE
9600
EIGHT
TWO
NONE *
9600
EIGHT
TWO
NONE
9600 *
Scroll down to PREVIOUS MENU and
select ENTER to return to the Modbus
Settings Menu Screen.
Scroll down to PREVIOUS MENU and select ENTER
to return to the Main Menu Screen.
Select ENTER on SAVE CHANGES to return to the
Main Menu Screen.
ENTER to select the calibration menu.
change the value to either
'EIGHT' or 'NINE'.
The operator may change the
stop bits by moving the cursor to
STOP BITS and select ENTER,
then using the UP/DN arrows to
change the value from either
'ONE' or 'TWO'.
The operator may change the
parity checking by moving the
cursor to PARITY and select
ENTER, then using the UP/DN
arrows to change the value from
'NONE', 'ODD' or "EVEN'.
The operator may change the
baud rate by moving the cursor
to BAUD RATE and select
ENTER, then using the UP/DN
arrows to change the value to
one of {1200, 2400, 4800, 9600,
19200 and 38400}.
Return to the 485 bus menu and
save the changes by moving the
cursor to the next screen and
select ENTER.
P/N 1580281
Rev 10, 20150707