Table of Contents
Advertisement
7. Press the "ON" button, then press the "X" button to exit the menu. When the Booster Pump is
running wavy line should appear to the right of the Booster Pump image indicating that the
motor is on.
8. Let the Booster pump run for 30 minutes to flush out all membrane preservative.
9. Check system for any leaks.
10. Return Booster Pump to AUTO mode and return FWF to AUTO mode
11. Re-direct the product water back to the tank or point-of-use.
12. Proceed to STANDAR OPERATION on the next section.
Hide quick links:
Advertisement
Table of Contents
