How To Charge Pilot Pro; How To Charge Your Device; Standard Accessories; Charge For Your Laptop Or Other Devices - Poweradd User Manual

3. Without pressing the button for 3 seconds, the current voltage
option will be defaulted. The LCD will turn itself off
automatically detecting no device connected to the output port.

How To Charge Pilot Pro

1. Connect the AC adapter to the input of Pilot Pro
2. Plug the AC adapter into a wall socket.
Note: Please fully charge and restart it if it is under lock status
or in short circuit protection caused by incorrect operation.
Charge for 5V USB-Powered devices
1. Make sure your device is DC-5V USB-charged.
2. Insert another end of your USB cable to your device.
3. Insert the USB port to the Pilot Pro's USB output port.
4. Built-in identified microchips will start the Pilot Pro and begin
charging automatically (If Pilot Pro can't be activated, just
3
short press the power button to turn it off).

Charge for your laptop or other devices

1. Confirm the input voltage of your laptop or other notebook
before charging, then switch the voltage button to
corresponding option.
2. Select the correct connector which fits your laptop DC input
port.
3. Connect the DC cable with the connector.
4. Connect your laptop and mobile power by the DC cable.
5. Disconnect your device after fully charged.

Standard Accessories

1. AC adapter
2. DC cable
3. USB cable
4. 10 notebook connectors
A B
Sony
Toshiba Nec Lenovo, Acer, Toshiba
(6.0*4.25mm) (6.25*3.0mm) (5.5*2.1mm)
G H
Lenovo(Ultrabook)
Acer, Benq Samsung
(4.0*1.7mm) (5.5*3.25mm) (4.5x11mm )
C D E
Asus HP Acer
(4.75*1.7mm) (5.5x1.7mm)
M J K
Dell, Hp Lenovo,Sony
(7.4*5.0mm) (7.9*5.4mm)
4
DC line