Table of Contents
Advertisement
CEC Control
CEC
Auto Standby
Auto Power on
ARC
CEC Control
Device List
BACK
Back
This option enables the TV to control the device linked to it.
1. Press ▲/▼ button to select "CEC Control" option.
2. Press OK button to enter the "CEC Control" submenu.
Power
1. Press ▲/▼ button to select "Power" option.
2. Press OK button to power off the device linked to the TV.
Root Menu
1. Press ▲/▼ button to select "Root Menu" option.
2. Press OK button to enter the root menu of the device linked to the TV.
Setup Menu
1. Press ▲/▼ button to select "Setup Menu" option.
2. Press OK button to enter the setup menu of the device linked to the TV.
Menu
1. Press ▲/▼ button to select "Menu" option.
2. Press OK button to enter menu of the device linked to the TV.
PVR Option
1. Press ▲/▼ button to select "PVR Option" option.
2. Press OK button to enter "PVR Option" submenu, for detailed operation refer to "PVR".
No Signal StandBy
1. Press ▲/▼ button to select "No Signal StandBy" option.
2. Press ◄/► button to choose "On" or "Off". If set "On", TV will auto standby after 10 minutes
in "No Signal" states.
(In VGA mode, if no any operation 15 seconds later, TV will enter standby mode.)
On
Off
On
On
MENU
Exit
CEC Control
Power
Root Menu
Setup Menu
Menu
31
No Signal
Advertisement
Table of Contents
