Table of Contents
Advertisement
IMAGE SETTINGS MENU
Picture Mode
Picture Mode
BackLight
Aspect Ratio
Noise Reduction
Colour Temp
BACK
Back
Your TV has these picture settings (Soft, Vivid, User, Dynamic, Standard) that are preset from the
factory. Only "User" mode can be set to your preference by adjusting particular items such as
Contrast, Brightness, Color, Sharpness, Tint.
1. Press ▲/▼ key to select "Picture Mode" option.
2. Press ◄/► key to select one picture mode.
Backlight
Adjust Backlight.
1. Press ▲/▼ key to select "Backlight" option.
2. Press ◄/► key to adjust Backlight value.
Aspect Ratio
You can select the picture size which best corresponds to your viewing requirement.
1. Press ▲/▼ key to select "Aspect Ratio" option.
2. Press ◄/► key to set the scale mode. You can also press "Aspect" key on the remote
control to select one of the scale modes. Each source has different scale modes.
Colour Temp
You can change the color of the entire screen according to your preference.
1. Press▲/▼key to select "Colour Temp" option.
2. Press ◄/►key to select your desired colour temperature.
Standard: Keeps whites white.
Warm: Makes whites reddish.
Cool: Makes whites bluish.
Noise Reduction
1. Press ▲/▼ key to select "Noise Reduction" option.
2. Press ◄/► key to adjust noise reduction mode.
Note: Noise Reduction is disabled in VGA Mode.
Standard
100
16:9
Low
Cool
MENU
Exit
20
No Signal
Advertisement
Table of Contents
