Instructions For Assembly; Checklist (Contents Of Packaging) - Kettler SVEN Champion 7043-190 Owner's Manual

Instructions for Assembly

Carefully read these assembly instructions before beginning
with the work itself. The individual steps are additionally ex-
plained in the sequence by means of symbols, in some cases a
text mark indicates that a written explanation is available.
Strictly follow the individual mounting steps to ensure a safe use
and operation of the unit.
To ensure that the table-tennis table is properly assembled and can
be safely used, observe the instructions for assembly exactly.
Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if child-
ren play with plastic bags!

Checklist (contents of packaging)

4x M8x110 6x M8x45
4x M6x60
2x M8x120
4x M6x35
1x
You also need the following tools (Not included):
2x
6x M6x37
4x M8
2x M8
2x
SW13 SW10
2x 2x
The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand un-
til resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
2x
1x
2x
2x
4x
2x
2x
4x
3x
6x M6
16x ø12
4x M6
20x ø16
2x
12x ø25
2x 2x
1x
1x
2x 2x
8x 4x
2x ø20 6x
4x 4x
2x
3