Setup Menu - NavAtlas NA30C Installation And Owner's Manual

Press MENU to toggle through and select one of the following setup menus: Audio,
General, Screen and Bluetooth.
1. Once the desired menu is displayed, rotate the volume knob to scroll through the list
of menu options.
2. Press SELECT to select a specific option to adjust, then rotate the volume knob left/
right to adjust or activate the desired feature.
3. Press SELECT to confirm and save the changes.
Audio:
• EQ - Select between the following preset equalization curves: Flat, Rock, Jazz, Pop,
Classic, Beat or User (user defined)
• 60Hz, 150Hz, 400Hz, 1KHz, 3KHz, 7KHz and 15KHz - Adjust between -8 and 8.
• Balance - Adjust left/right balance between 8L and 8R.
• Fader - Adjust front/rear balance between 8F and 8R.
• Loudness - Turn loudness feature On or Off.
• Loud-Freq - Select 400Hz, 800Hz or 2400Hz.
• Subwoofer - Adjust subwoofer to 80Hz, 120Hz, 160Hz or Off.
• Subwoofer Volume - Adjust subwoofer volume 0-11.
General:
• Tuner - Select desired tuning region: USA, South America or Europe.
• Auto Station Store - Select to automatically find and store six preset stations.
• Local - Turn the local feature On or Off.
• Clock - Rotate the volume knob to select the hours, minutes and AM/PM.
• Clock Mode - Choose between 12-hour and 24-hour clock.
• Version - Display the current software version number.
• Default - Press SELECT to restore unit to default factory settings.
Screen:
• Brightness - Adust between 1 and 12.
• Contrast- Adust between 1 and 12.
• Hue - Adust between 1 and 12.
• Saturation - Adust between 1 and 12.
• Sharpness - Adust between 1 and 12.
Bluetooth:
• Bluetooth - Turn Bluetooth feature On or Off.
• Auto Connect - Turning Auto Connect to On will program the unit to automatically
the Bluetooth device when in range.
NA30C

Setup Menu

6