NavAtlas NA30C Installation And Owner's Manual

Am/fm/wb receiver with bluetooth

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

NA30C

INSTALLATION/OWNER'S MANUAL

AM/FM/WB receiver with Bluetooth

IP66

Table of Contents

Summary of Contents for NavAtlas NA30C

Page 1 NA30C INSTALLATION/OWNER'S MANUAL AM/FM/WB receiver with Bluetooth IP66...
Page 2 NA30C Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Page 3: Wiring Diagram
** Digital output is designed to work for all amplified Navatlas products only. When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The NA30C uses one 30 amp ATM fuse located in-line.
Page 4: Control Locations - Receiver
NA30C Control Locations - Receiver 1. Power/Mute 5. Mode/Camera (Hold 5 seconds) 2. Audio/Menu 6. Select/Preset Menu 3. Tune/Track Down 7. Preset Up 4. Tune/Track Up 8. Play/Pause/Band...
Page 5: General Operation
Radio, Auxiliary Input, USB and Bluetooth modes. Modes of operation are shown in the display. The NA30C uses a 3.5mm connection to any external or Auxiliary Input portable device for audio streaming. An optional extension (model SU35) is available to mount this connection onto the vehicle's dash for easy access.
Page 6: Setup Menu
NA30C Setup Menu Press MENU to toggle through and select one of the following setup menus: Audio, General, Screen and Bluetooth. 1. Once the desired menu is displayed, rotate the volume knob to scroll through the list of menu options.
Page 7: Am/Fm Tuner Operation
NA30C AM/FM Tuner Operation Manual Tuning Press TUNE or TUNE momentarily to change radio fre- quency up or down one step at a time. Press and hold to advance quickly. Seek Tuning Press TUNE or TUNE for more than two seconds (then release) to automatically seek and tune to the next strong station.
Page 8: Usb Operation
NA30C USB Operation To play MP3 files, connect a USB device containing MP3/files. Playing MP3/WMA Files “USB Loading" will flash in the display. Depending on the number of files and folders, this may take several seconds. Press the BAND button to pause or resume playback.
Page 9: Mp3/Wma Operation
NA30C MP3/WMA Operation File/Folder Compatibility and Support Type Specification • MP3 data (.mp3) Compatible File Types • WMA data (.wma) • DRM protected files • WMA lossless • Apple lossless • WMA Pro Incompatible File • MP3 Pro Types • MP3 playlists •...
Page 10: Bluetooth Operation
The device name is "NA30C" The Bluetooth passcode "0000" Note: The NA30C can be in any mode of operation when pairing is performed. The NA30C supports A2DP (advanced audio distribution Streaming Audio profile) wireless streaming audio from your Bluetooth mobile device directly to your head unit.
Page 11 NA30C Notes...
Page 12: Limited One-Year Warranty
(preferably in the original package) and ship it by NavAtlas agrees, at our option, during the prepaid transportation with a copy of warranty period, to repair any defect in the original receipt from the retailer to material or workmanship or to furnish an an authorized service center.
Page 13: Troubleshooting
NA30C Troubleshooting Problem Cause Action Yellow wire not connected or incorrect Check connections for proper voltage Red wire not connected or voltage (11-16VDC) Unit will not turn on incorrect voltage (no power) Black wire not connected Check connection to ground...
Page 14: Specifications
NA30C Specifications Tuning range: FM Tuner 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz-13kHz Tuning range: AM Tuner 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Preout Voltage: General 4.5 Volts RMS Dimensions: 4 1/16"...
Page 15: Fcc Compliance
NA30C FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.