Replacing The Lamp; Technical Specifications - euroline Hexopus base black User Manual

Replacing the lamp

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one E-27 (UV) lamp with max. 60W.
During the operation, the lamp reaches temperatures of up to 275° C .
UV illuminants are hazardous waste which needs to be disposed of appropriately.
Please dispose of the unusable UV illuminants in accordance with the current legal regulations
Procedure:
Step 1: If replacing the lamp, remove the old lamp from the lamp-socket.
Step 2: Insert the E-27 (UV) lamp into the lamp-socket.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Fitting lamp:
Maximum ambient temperature T
Maximum housing temperature T
Accessory:
LED BC-1 E-27 Beam effect RGB
LED BC-1 E-27 Beam Effect 6400K
LED GM-1 E-27 love
LED GM-1 E-27 christmas/party
LED GM-1 E-27 spring
LED GM-1 E-27 winter
LED GM-1 E-27 Halloween
UV ES lamp 15W E-27 3U
UV ES lamp 20W E-27 3U
UV ES lamp 25W E-27 3U
Please note: Every information is subject to change without prior notice. 17.11.2015 ©
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
230 V AC, 50 Hz ~
60 W
155 x 85 mm
0.5 kg
E-27 (UV) lamp with max. 60 W
: 45° C
a
(steady state): 275° C
C
No. 51918801
No. 51918980
No. 51919200
No. 51919210
No. 51919220
No. 51919230
No. 51919240
No. 89504005
No. 89506005
No. 89507005
11/11 00095129.DOC, Version 1.3