Redundant Power Supply Module (For Rs500A-E10-Rs4 / Rs500A-E10-Rs12U Only) - Asus RS500A-E10 Series User Manual

2.8.2 Redundant power supply module
(for RS500A-E10-RS4 / RS500A-E10-RS12U only)
To replace a failed redundant power supply module:
1. Lift up the power supply module lever.
2. Hold the power supply module lever
and press the PSU latch, then pull the
power supply module out of the system
chassis.
3. Prepare the replacement power supply
module.
4. Insert the replacement power supply
module into the chassis then push it
inwards until the latch locks into place.
2-36
Module lever
Module lever PSU latch
Chapter 2: Hardware Information