Error Messages (Troubleshooting) - Stanton C.503 User Manual

ERROR MESSAGES & TROUBLESHOOTING
Error Messages occur when there is known issue / problem with the playback device.
Below are the Error numbers, and explanation of the problem and how to correct it.
Err 01 TOC Read error - the disc's Table of Contents cannot be read within 20 seconds - try with another disc or remove
and clean the existing disc before replacing it
Err 02 GFS error - GFS signal cannot be detected within five seconds - try with another disc or remove and clean the exist-
ing disc before replacing it
Err 03 Focus error - after repeating the attempt eight times to focus, an error still occurs - try with another disc or remove
and clean the existing disc before replacing it
Err 04 Sub-Q error - the sub-Q code cannot be detected (twice within five seconds) - try with another disc
Err 05 Loading error - the open or close operation cannot be completed, even after retries, or there is an internal error -
make sure that there are no obstructions preventing the tray's operation
Err 06 Sled error - an internal drive error - try turning the power off, waiting a few seconds, and turning it on again
Err 07 Error in communication between decks - try turning the unit off, waiting a few seconds, and turning it on again
Err 10 S-DRAM error - an internal S-DRAM error - try turning the power off, waiting a few seconds, and turning it on again
NOTE:
If any of the numbered error messages are repeated, try using another disc.
If the errors continue with a number of discs, turn the unit off, wait for a few seconds, and turn it on again.
If the errors still continue or other error occurs, contact your local Stanton distributor for repair. A list of these distributors
can be found online @ www.StantonDJ.com under "World Distributors".
The C.503 will enter SLEEP mode after 30 min. of inactivity. To conserve electricity and the LCD, the screen will darken
and may appear off; however the word SLEEP is partially visible. This is a normal procedure when the unit is not in use, to
exit sleep mode simply press any button or the jog wheel.
For additional user support on this and other Stanton products contact DJ@Stantonmagentics.com or visit us online at
www.Stantonmagnetics.com
Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement