Advertisement
Picking:
Mi VR helmet, touch panel, instruction, batteries x2
Soft rubber small pillows
Helmet
button
External case of
the device
Optical lens x2
Headband pin
Back pillow
Button of the belts length regulation
Attention: Mi VR helmet does not need to be charged, it uses power and charge from
a special remote control.
Main device:
Disk of the distance
regulatuion
Forward protective panel
Foam Headband
Optical
sensor
Spongy pillow
1
Installation of the phone in Type C slot and special clamp of Mi VR helmet, using
different models of phones.
Type C
slot
Reset
button
1. Open the forward protective panel of the
device
2. With help of a special clamp and the
button of dumping you can adjust the
provision Type C slot
3. For phones with a different size of the
display adjust properly the provision Type
C slot
- USB Type C slot has feature of the phone installation . During installation
phone into a helmet it is necessary to make a little efforts for its correct and
reliable fixing.
- After installation phone into a helmet, be convinced of its reliable fixing and
installation to avoid falling of the device and its breakage.
- After installation of phone we send to Mi VR helmet, be convinced of its
correct situation. In case of unsuccessful layout or the wrong phone installation
there can be a feeling of discomfort when viewing video.
Advertisement
