Preliminary Steps - Singer 1022 Instruction Manual And Accessories

preliminary steps

CONNECTING THE MACHINE
Before plugging in your machine, be sure
that the voltage and number of cycles
indicated on the plate under the hand
wheel conform to your electrical power
supply.
Push the machine plug into the receptacle
at the right end of the machine bed. Then
connect the power-line plug to
efectrical outlet.
OPERATING MACHINE AND
CONTROLLER
To turn on both machine and sewing
press power and light swith to ON
light,
position. To turn off machine and light,
press switch at „0" to OFF position.
\A^ARNINGl
wer and light switch before changing
needles, presser feet, and needle plates
and when leaving the machine unatten
ded. This eliminates the possibility of
starting the machine by accidentally pus
hing the speed controller.
To start the machine,
controller. The harder you press, the fas
ter the machine will sew.
To stop the machine from sewing,
remove pressure from speed controller.
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
your
Turn off the po
press the speed
maszynykrawieckie.shophurt.pl
Power and Light
Speed Controller