Installation - Electrolux EC2830AOW2 User Manual

12 www.electrolux.com
Problem
8.2 Customer Service
If your appliance is still not working
properly after making the above checks,
contact the nearest service centre.
To obtain fast service, it is essential that
when you apply for it you specify the
model and serial number of your appliance
which can be found either on the
guarantee certificate or on the rating plate
located on the external right side of the
appliance.
8.3 Replacing the lamp
WARNING!
Do not remove the lamp cover
at the time of replacement. Do
not operate the freezer if the
lamp cover is damaged or
missing.

9. INSTALLATION

9.1 Positioning
CAUTION!
If you are discarding an old
appliance that has a lock or
catch on the lid, you must
ensure that it is made unusable
to prevent young children
being trapped inside.
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
WARNING!
Refer to Safety chapters.
Possible cause
There is no cold air circula-
tion in the appliance.
1. Disconnect the mains plug from the
2. Replace the used lamp with a new
3. Connect the mains plug to the mains
4. Open the lid. Make sure that the lamp
Climate
class
SN
N
ST
T
Solution
Make sure that there is cold
air circulation in the appli-
ance.
mains socket.
lamp of the same power and
specifically designed for household
appliances (the maximum power is
shown on the lamp cover).
socket.
comes on.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Some functional problems
might occur for some types of
models when operating outside
of that range. The correct
operation can only be
guaranteed within the specified
temperature range. If you have
any doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Service Centre