Battery Removal - Remington XR1400 Manual

TRIMMING
• Push the trimmer button to release the detail trimmer.
• Hold the trimmer at right angles to the skin.
• Place the trimmer at desired trim line for a quick, easy professional trim.
• To retract and switch off the trimmer, push the trimmer down and lock into place.
TIPS FOR BEST RESULTS
• Use moderate to slow stroking movements. The use of short circular motions in
stubborn areas may obtain a closer shave, especially along the neck and chin line.
• DO NOT press hard against the skin in order to avoid damage to the rotary heads.
CARE FOR YOUR SHAVER
• Care for your appliance to ensure a long lasting performance. We recommend you
clean your appliance after each use. The easiest and most hygienic way to clean the
appliance is by rinsing the appliance head after use with warm water.
CLEANING
• Pull the rotary shave face off the hair pocket (Fig. 1 and 2).
• Tap out excess hair shavings from the hair pocket (Fig. 3). Hair clippings can also be
washed out of the hair pocket and/or shave face by rinsing these under a tap.
• Once dry, snap the shave face back onto the hair pocket (Fig. 4).
CLEANING TRIMMER
• Lubricate the teeth of the trimmer every six months with a drop of sewing machine oil.
• Replacement parts and accessories available to buy at www.remington.co.uk/
parts-accessories

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• Unplug the shaver.
• Run the shaver until the motor stops.
• Remove the head from the shaver (pull head up and off).
• Remove the screw that is exposed when the head is removed.
• Using a small screwdriver, pry the front cover from the body.
• Using a small screwdriver, pry both side covers from the body.
• Remove 4 screws located on the front of shaver along the outside edge.
• Using a small screwdriver, pry up the newly unsecured front inner housing.
• Remove 3 screws that were newly exposed on front.
• Using a small screwdriver, pry up the newly unsecured inner back housing to expose the
battery.
• Pry the battery free from the circuit board.
• Dispose of the battery properly.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
5