Table of Contents
Advertisement
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See "Ringer Types"on
page 49.)
To select a ringer type for an entry:
1.
From standby mode, press Contacts (right softkey).
2.
Select the entry for which you want to set the incoming
ringer and press
3.
Press Options (right softkey) > Edit; or if you are selecting
an email or Web address, press Edit (right softkey).
4.
Scroll down to the box next to the
5.
Select a ringer and press
ringer type, a sample ringer will sound.)
6.
Press Save (left softkey) to save the ringer type.
.
. (When you highlight a
Section 2F: Using Contacts
icon and press
.
113
Advertisement
Table of Contents
