BUS BODY ELECTRONICS
2.6 Reheat
Note
The reheat mode can only be activated in the AUTO
mode (when the engine is running) and at at least 8°C
outside temperature.
In addition, the difference between setpoint of room
tempera-ture and the setpoint of duct temperature
must be <2K, and the difference between outside
temperature and the setpoint of duct temperature
must be <5.
After 10 minutes the reheat mode is terminated automat-
2.6.1 Activate
Press button (Fig. 3, No.9).
The button's LED lights up and the reheating icon appears
on the screen (Fig.25).
2.6.2 Terminate
Press button.
The button's LED turns off and the heating icon disappears
on the screen.
Figure 27 - SC1000 Entfeuchten aktiv
17