Remington WDF5030 Quick Start Manual page 6

ENGLISH
• Remove the shaver head assembly by sliding and holding the shaver head
release button on the back of the shaver to the right. At the same time pull
the shaver head assembly firmly to remove (Fig. 2).
• Brush or rinse any accumulated hair from the main body of the shaver, head
assembly, foil holder and cutter assembly.
• Leave the head assembly and foil holder open to let the shaver dry
completely.
• Reassemble the shaver head and body by sliding and holding the shaving
head release button to the right and securely snapping the head back onto
the body (Fig. 3).
• Reassemble the foil holder to the shaver head by securely snapping into
place.
• Do not rinse with water hotter than 70°C.
• Do not submerge the appliance.
• Do not clean the shaving foil with a brush.
• At regular intervals, put a drop of sewing machine oil onto the foils and
cutters head. Remove excess oil.
, REPLACING THE FOILS AND CUTTERS
• To ensure the continued highest quality performance from your shaver, we
recommend that the foil and cutter are replaced every 6 months. These can
be obtained from your nearest Remington Service Centre.
6
Fig. 2
Fig. 3