Removing The Microsd Card - Motorola MOTOSLVR L7C User Manual

Sprint cell phone user manual
Hide thumbs Also See for MOTOSLVR L7C:
Table of Contents

Advertisement

6.
Replace the battery and the back cover.
Note:
Make sure your battery is fully charged before using the
microSD card. Your data may become damaged or unusable if
the battery runs out while using the microSD card.
Be sure to use only recommended microSD cards (64MB
2GB). Using non-recommended microSD cards could cause
data loss and damage your phone.

Removing the microSD Card

To remove the microSD card from your phone:
1.
With your phone powered off, remove the back cover
and then remove the battery.
2.
Slide the cardholder cover down to unlock it.
3.
With your thumbnail, lift the cover of the cardholder as
shown in the illustration below.
4.
Gently slide out the microSD card from the cardholder.
5.
Close the top of the cardholder and slide the door up to
lock into place.
6.
Replace the battery and the back cover.
122
Section 2I: Using the microSD Card

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slvr l7c

Table of Contents