ezee Bike User Manual page 21

Repairing a punctured tyre
recommend that you get a specialist to carry out the repairs. You
can always of course consult a specialist and carry out the repairs
on your own.
As there are no electronic components on the rear wheel, its
removal follow standard proceedures as with normal bicycles with
internal gears. Read the Shimano gear manual provided for more
instructions.
connection and 3 colour coded wire connections (Blue, Yellow,
Green). Unplug these before proceeding to remove the front wheel.
Be mindful of the tightening assembly sequence of washers, nuts
and spacers.
Hub motor and general inspection
After 5,000 kms (3,000 miles) of cycling. We recommend you
arrange to have a thorough inspection of your bicycle by an eZee
dealer. This includes opening up the hub motor to inspect and
lubricate the gears.
Maintenance
If you have a punctured tyre, we
As the front wheel contains the hub motor,
there are additional steps in the case you
require the entire wheel to be removed from
the bike.
A philips head screwdriver will be required to
open the cable housing (shown on left) to first
unplug the wires than run from the motor to
controller. There should be 1 x 6 pin
21