Technical Specifications; Hardware Specifications; Software Specifications - HP TippingPoint Series Hardware Installation And Safety Manual

Table 3-1 TippingPoint 10 LEDs
LED
ACTIVE
Power button

Technical Specifications

The following section details the hardware and software specification for the TippingPoint 10.
• "Hardware
• "Software

Hardware Specifications

This section details the specifications for the hardware components.
Table 3-2 TippingPoint 10 Specifications
Feature
Dimensions
Weight
Temperature Requirements 0 to 40 ° C (32 to104 ° F) — Operating
Humidity Requirements
Power Specifications
Maximum Data Rate
Rate Limits: Kbps
Rate Limits: Mbps

Software Specifications

To run the TippingPoint Intrusion Prevention System (IPS), you must use one of the following:
• A network-connected PC that supports Internet Explorer 7.x or higher or Mozilla Firefox 3.x or higher.
• TippingPoint Security Management System (SMS) Software, Version 3.6 and above.
Location
In the middle of each port pair that
comprises a segment.
On the Power button on the back of
the device.
Specifications" on page 15
Specifications" on page 15
Description
10.63 in x 7.32 in x 2.01 in
(27.0 cm x 18.6 cm x 5.1 cm)
5.1 lbs (2.3 kg)
-25 to 70° C (- 1 3 to 158 ° F) — Storage
Note: Please allow time for the device to return to room
temperature before powering the device on.
5% to 95% (non-condensing)
Power Adapter: 1 10-240 VAC universal, 50-60 Hz, 5A
Power Output: 12 V DC
20 Mbps aggregate throughput between both segments
50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,
700, 800, 900
1, 1.5, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1 1, 12, 13, 14, 15, 20
Description
Green: The unit is passing and
inspecting traffic.
No Light: The unit has no power or
is using the internal ZPHA to pass
traffic without inspection.
Off: No power is coming from the
AC/DC adapter.
Red: The unit is standing by to start.
Press the power button again to
start the unit.
Blue: The unit is running.
TippingPoint 10/110/330 Hardware Installation and Safety Guide 15