Backyard Products WOOD PAVILION 12' X 12' Assembly Manual
  1. Manuals
  2. Brands
  3. Backyard Products Manuals
  4. Outdoor Furnishing
  5. WOOD PAVILION 12' X 12'
  6. Assembly manual
Backyard Products WOOD PAVILION 12' X 12' Assembly Manual

Backyard Products WOOD PAVILION 12' X 12' Assembly Manual

Actual floor size is 11' x 11'
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Call Us First!
DO NOT RETURN TO STORE.
For immediate help with assembly or product information
call our toll-free number:
1-888-827-9056
or email:
customerservice@backyardproductsllc.com
Our staff is ready to provide assistance.
April through October M - F 8:00 AM to 9:00 PM EST
Saturday 8:30 AM to 5:00 PM EST
November through March M - F 8:00 AM to 8:00 PM EST
1

Advertisement

Table of Contents
loading

Summary of Contents for Backyard Products WOOD PAVILION 12' X 12'

  • Page 1 Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll-free number: 1-888-827-9056 or email: customerservice@backyardproductsllc.com Our staff is ready to provide assistance. April through October M - F 8:00 AM to 9:00 PM EST Saturday 8:30 AM to 5:00 PM EST November through March M - F 8:00 AM to 8:00 PM EST...
  • Page 2 (This page intentionally left blank.)

  • Page 3: Assembly Manual

    ASSEMBLY MANUAL Backyard Products, LLC 3-15-19 16563 1000 Ternes Dr. Monroe, MI 48162 WOOD PAVILION 12' X 12' ACTUAL FLOOR SIZE IS 11' X 11' KEEP THIS MANUAL FOR FUTURE REFERENCE   IMPORTANT! READ INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING ASSEMBLY.

  • Page 4: Important Safety Information

    IMPORTANT SAFETY INFORMATION  IT IS VERY IMPORTANT TO READ AND FOLLOW THE SAFETY PRECAUTIONS BEFORE ASSEMBLY AND DURING THE USE OF THE PRODUCT. 1. The backyard pavilion is designed primarily to extend the outdoor use of your home. DO NOT USE STRUCTURE AS FOLLOW: - As safety barrier to prevent unsupervised access to pools, hot tubs, spas or ponds.

  • Page 5: Proper Maintenance

    ASSEMBLY GUIDES         TOOLS REQUIRED:   Tape Measure   Safety Glasses   Carpenters Level   Hard Hat   Drill / Driver   Square   o 1/8” Drill Bit                     o 1/4” Drill Bit   Wrench   Ratchet  o 7/16”, 1/2" &      9/16”   Socket   Tool Belt  o 7/16”, 1/2” &  9/16”   8’ Step Ladder  ...
  • Page 6 12 X 12 WOOD PAVILION SPECIFICATIONS Box 1 14"H x 18"W x 100"L Approximately 260 lbs Box 2 10"H x 27"W x 106"L Approximately 307 lbs Box 3 7-1/2"H x 48-1/2"W x 96-1/2"L Approximately 407 lbs 12'-2" 12'-2" 10'-5" 9'-10" TOTAL HEIGHT : 10' - 5"...

  • Page 7: Mounting Hole

    POST LAYOUT 12" 16 " 7" FOOTER BRACKET MOUNTING HOLE POST " 7" POST " POST 132" POST TO POST (OUTSIDE DIMENSION) 132" 16 " 16 " POST TO POST POST TO POST POST TO POST (OUSIDE DIM.) (DIAGONAL INSIDE DIM) (DIAGONAL INSIDE DIM) 137"...
  • Page 8 ANCHORING IT IS IMPORTANT THAT THIS PAVILION BE ANCHORED ON A FLAT AND LEVEL SOLID BASE. PLEASE REFER TO THE RECOMMENDED ANCHORING METHODS SHOWN BELOW. FAILURE TO ANCHOR WILL VOID YOUR WARRANTY We supply Post Mounts with this structure which gives you the flexibility to permanently install your structure to a pre-existing or new wood or concrete surface.
  • Page 9 ADDITIONAL MATERIALS REQUIRED TO VALIDATE YOUR WARRANTY 1. SHINGLES: TWO SHINGLE TYPES TO CHOOSE FROM ARCHITECTURAL SHINGLES 3-TAB SHINGLES x7 BUNDLES OF x9 BUNDLES OF 3-TAB ARCHITECTURAL SHINGLES SHINGLES x2 BUNDLES OF 3-TAB SHINGLES FOR STARTER ROW x1 TUBE OF ROOFING CAULK &...

  • Page 10: Approximate Dimensions

    PART IDENTIFICATION BOX 1 APPROXIMATE QTY. PART No. DESCRIPTION STAMP ID DIMENSIONS 063-5-1288-TTL TOP TRIM LARGE 5/8 x 4-1/2 x 12-7/8" TWO PARTS PACKED IN EACH POST 1-3-0850-BST BEAM SUPPORT TRIM 3/4 x 3 x 8-1/2" FOUR PARTS PACKED IN EACH POST 125-3-9738-SL STRAP LONG 1 x 3 x 97-3/8"...
  • Page 11 PART IDENTIFICATION BOX 2 APPROXIMATE QTY. PART No. DESCRIPTION STAMP ID DIMENSIONS 125-3-4938-SS STRAP SHORT 1x 3 x 49-3/8" 125-4-1053-RCLH RAFTER CORNER LH 1 x 3-3/8 x 105-3/8" 125-4-1053-RCRH RAFTER CORNER RH 1 x 3-3/8 x 105-3/8" 125-425-7440-FRH FASCIA RH 1-1/4 x 4-1/4 x 74-1/2 125-425-7428-FLH FASCIA LH...
  • Page 12 PART IDENTIFICATION BOX 2 (CONT'D) APPROXIMATE QTY. PART No. DESCRIPTION STAMP ID DIMENSIONS 2-3-7777-CR CENTER RAFTER 1-3/8 x 3 x 77-3/4" 2-6-2400-BRS BEAM REAR SHORT 1-3/8 x 5-3/8 x 24" 2-6-2675-BRL BEAM REAR LONG 1-3/8" x 5-3/8 x 26-3/4" 2-6-6694-BFSLH BEAM FRONT SHORT LH 1-3/8 x 5-3/8 x 66-15/16"...
  • Page 13 PART IDENTIFICATION BOX 3 APPROXIMATE QTY. PART No. DESCRIPTION STAMP ID DIMENSIONS 625-238-2650-PSRH PLYWOOD SIDE RH 5/8 x 23-7/8 x 26-1/2" 625-238-2650-PSLH PLYWOOD SIDE LH 5/8 x 23-7/8 x 26-1/2" 625-29-5613-PT PLYWOOD TOP 5/8 x 56-1/8 x 29" 625-48-9600-PC PLYWOOD CENTER 5/8 x 48 x 96"...
  • Page 14 BRACKETS BAG # PACK QTY. DESCRIPTION 09-4-0575-CB CORBEL BRACKET 23-18-1044-HB HIP BRACKET 16-16-9291-PB PEAK BRACKET 09-7-1200-FB FOOTER BRACKET 14-18-6090-RB X 20 RAFTER BRACKET...
  • Page 15 HARDWARE BAG # PACK QTY. DESCRIPTION 1701PC X 165 #8 X 1-1/2" WOOD SCREW 1342PC X 56 #8 X 2" WOOD SCREW 1327PC X 230 #8 X 2-1/2" WOOD SCREW 1725BZ X 20 #8 X 1-1/2" PAN HEAD SCREW 1491BZ X 67 #12 X 1-1/2"...
  • Page 16 HARDWARE BAG # PACK QTY. DESCRIPTION 1499BZ X 42 1/4" WIDE WASHER (NOT TO SCALE) 1386BZ X 15 1/4" LOCK NUT 1719BZ X 12 1/4" X 2-3/4" HEX BOLT 1381BZ X 40 5/16" T-NUT 1336BZ X 65 5/16" REGULAR WASHER 1721BZ X 54 5/16"...
  • Page 17 HARDWARE BAG # PACK QTY. DESCRIPTION 1465BZ 5/16" X 1-5/16" HEX BOLT 1703BZ X 16 5/16" X 1-1/2" HEX BOLT 1498BZ X 20 5/16" X 2-1/4" HEX BOLT 1720BZ X 16 5/16" X 2-3/4" HEX BOLT 1727Z X 16 1/4" X 2" HEX LAG SCREW 15173BZ X 16 5/16"...
  • Page 18 HARDWARE BAG # PACK QTY. DESCRIPTION 15119 X 457 1-1/2" RING SHANK NAIL 15110 X 935 3/4" ROOFING NAIL 15103 X 175 1" ROOFING NAIL NOTES:...

  • Page 19: Step 1: Post Assembly

    STEP 1: POST ASSEMBLY STAMP ID WOOD COMPONENTS BAG # HARDWARE POST 1724BZ #14 x 1-1/2 Pan Head Screw 09-7-1200-FB Footer Bracket • WITH POST LAYING ON THE GROUND, ORIENT UPPER HOLE FACING UP AND LOWER HOLE FACING SIDEWAYS. (FIG 1.1) •...
  • Page 20 STEP 2: LONG BEAM ASSEMBLY STAMP ID WOOD COMPONENTS BAG # HARDWARE BEAM FRONT LONG LH X 2 1381BZ 5/16" T-NUT BEAM FRONT LONG RH X 2 1703BZ 5/16" X 1-1/2" HEX BOLT 1721BZ 5/16" WIDE WASHER • ASSEMBLE TWO BEAM PARTS T + U AS SHOWN BELOW. (FIG 2.1) •...
  • Page 21 STEP 2: LONG BEAM ASSEMBLY (CONT'D) STAMP ID WOOD COMPONENTS BAG # HARDWARE BEAM REAR LONG 1381BZ 5/16" T-NUT BEAM CENTER 1720BZ 5/16" X 2-3/4" HEX BOLT 1721BZ 5/16" WIDE WASHER 1327PC #8 X 2-1/2" WOOD SCREW X 24 • ASSEMBLE TWO LONG BEAM ASSEMBLIES Q + V + Q + TU AS SHOWN BELOW.
  • Page 22 STEP 3: SHORT BEAM ASSEMBLY STAMP ID WOOD COMPONENTS BAG # HARDWARE BEAM FRONT SHORT LH X 2 1381BZ 5/16" T-NUT BEAM FRONT SHORT RH X 2 1703BZ 5/16" X 1-1/2" HEX BOLT 1721BZ 5/16" WIDE WASHER • ASSEMBLE TWO SHORT BEAM ASSEMBLIES R + S AS SHOWN BELOW. (FIG 3.1) •...
  • Page 23 STEP 3: SHORT BEAM ASSEMBLY (CONT'D) STAMP ID WOOD COMPONENTS BAG # HARDWARE BEAM REAR SHORT 1381BZ 5/16" T-NUT BEAM CENTER 1720BZ 5/16" X 2-3/4" HEX BOLT 1721BZ 5/16" WIDE WASHER 1327PC #8 X 2-1/2" WOOD SCREW X 24 • ASSEMBLE TWO SHORT BEAM ASSEMBLIES P + V + P + RS AS SHOWN BELOW.
  • Page 24 STEP 4: CORBEL ASSEMBLY STAMP ID WOOD COMPONENTS BAG # HARDWARE ARCH CORBEL LH 1703BZ 5/16" X 1-1/2" HEX BOLT ARCH CORBEL RH 1721BZ 5/16" WIDE WASHER 1381BZ 5/16" T-NUT 09-4-0575-CB CORBEL BRACKET • PLACE CORBEL BRACKET BETWEEN THE TWO ARCH CORBELS AT THE LAP JOINT. (FIG 4.1) •...
  • Page 25 STEP 5: SHORT WALL ASSEMBLY BAG # HARDWARE 1722BZ 3/8" X 10-1/2" HEX BOLT 1318BZ 3/8" REGULAR WASHER 1320BZ 3/8" LOCK NUT • PLACE A SUPPORT BLOCK UNDERNEATH EACH POST ASSEMBLY. • MOUNT SHORT BEAM ASSEMBLY ON TOP OF BOTH POST ASSEMBLIES AS SHOWN BELOW AND FASTEN ALL HARDWARE.
  • Page 26 STEP 5: SHORT WALL ASSEMBLY (CONT'D) BAG # HARDWARE 15173BZ 5/16" X 3" HEX LAG SCREW 1721BZ 5/16" WIDE WASHER 1723BZ 3/8" X 5"HEX LAG SCREW 1318BZ 3/8" REGULAR WASHER • PLACE CORBEL ASSEMBLY ON TOP OF BOTH POSTS. CORBEL BRACKET WILL BE POSITIONED BEHIND THE BEAM ASSEMBLY.
  • Page 27 STEP 5: SHORT WALL ASSEMBLY (CONT'D) BAG # HARDWARE 1491BZ #12 X 1-1/2" PAN HEAD SCREW X 4 • • LIFT UP WALL ABOUT WAIST HEIGHT TO FASTEN CORBEL BRACKET TO BEAM FROM BEHIND AS LIFT UP WALL ABOUT WAIST HEIGHT TO FASTEN CORBEL BRACKET TO BEAM FROM BEHIND AS SHOWN.
  • Page 28 STEP 6: ATTACHING LONG BEAM TO SHORT WALL BAG # HARDWARE 1722BZ 3/8" X 10-1/2" HEX BOLT 1318BZ 3/8" REGULAR WASHER 1320BZ 3/8" LOCK NUT • LAY SHORT WALL ASSEMBLY ON GROUND AS SHOWN BELOW. • ATTACH LONG BEAM ASSEMBLIES WITH NOTCHES FACING UP TO BOTH SIDES OF THE WALL. HAND TIGHTEN ALL BOLTS AT THIS TIME ONLY!! HAND TIGHTEN ALL BOLTS AT THIS TIME ONLY !!
  • Page 29 STEP 7: LIFTING SHORT WALL • SWING UP WALL AS SHOWN BELOW. • ASSISTANCE REQUIRED SWING UP WALL PIVOT...

  • Page 30: Step 8: Base Assembly

    STEP 8: BASE ASSEMBLY BAG # HARDWARE 1722BZ 3/8" X 10-1/2" HEX BOLT 1318BZ 3/8" REGULAR WASHER 1320BZ 3/8" LOCK NUT • LIFT UP THE SECOND SHORT WALL ASSEMBLY AS SHOWN BELOW. (FIG 8.1) • SWING UP BOTH LONG BEAM ASSEMBLIES AND ATTACH TO THE SHORT WALL ASSEMBLY AS SHOWN BELOW.
  • Page 31 STEP 9: CORBELS TO BASE ASSEMBLY BAG # HARDWARE 1491BZ #12 X 1-1/2" PAN HEAD SCREW X 4 1318BZ 3/8" REGULAR WASHER 1723BZ 3/8" X 5" HEX LAG SCREW 1721BZ 5/16" WIDE WASHER 15173BZ 5/16" X 3" HEX LAG SCREW •...
  • Page 32 STEP 10: HIP BRACKET BAG # HARDWARE 23-18-1044-HB HIP BRACKET 1491BZ #12 X 1-1/2" PAN HEAD SCREW X 12 • PLACE THE HIP BRACKET ON TOP OF THE POST WITH THE HOOKS FLUSH TO THE OUTSIDE CONTOUR OF THE POST GROOVE AND FASTEN AS SHOWN BELOW (FIG 10.1) •...
  • Page 33 STEP 11: FASCIA ASSEMBLY STAMP ID WOOD COMPONENTS BAG # HARDWARE FASCIA LH 1381BZ 5/16" T-NUT FASCIA RH 1721BZ 5/16" WIDE WASHER 1465BZ 5/16" X 1-5/16" HEX BOLT • ASSEMBLE FASCIA ASSEMBLY AS SHOWN BELOW. (FIG 11.1) • ASSEMBLY MUST BE STRAIGHT AND ALL HARDWARE FULLY TIGHTEN. (FIG 11.2) BEVEL UP FIG 11.1 5-16 T-Nut...

  • Page 34: Step 12: Roof Frame Assembly

    STEP 12: ROOF FRAME ASSEMBLY STAMP ID WOOD COMPONENTS BAG # HARDWARE RAFTER CORNER LH 1342PC #8 X 2" WOOD SCREW X 32 RAFTER CORNER RH 1327PC #8 X 2-1/2" WOOD SCREW CENTER RAFTER • ATTACH E O F TO FASCIA ASSEMBLY AS SHOWN BELOW. TOPS FLUSH ENDS FLUSH #8 X 2"...
  • Page 35 STEP 12: ROOF FRAME ASSEMBLY (CONT'D) STAMP ID WOOD COMPONENTS BAG # HARDWARE RAFTER SHORT LH 1327PC #8 X 2-1/2" WOOD SCREW X 32 RAFTER SHORT RH RAFTER LONG LH RAFTER LONG RH • PLACE ALL RAFTERS FLUSH TO INSIDE AND TOP OF FASCIA AND CENTERED AT EACH HOLE LOCATION AS SHOWN BELOW.
  • Page 36 STEP 12: ROOF FRAME ASSEMBLY (CONT'D) STAMP ID WOOD COMPONENTS BAG # HARDWARE STRAP SHORT 1701PC #8 X 1-1/2" WOOD SCREW X 64 STRAP LONG • FASTEN STRAPS TO RAFTERS AS SHOWN BELOW. CORNER RAFTER STRAP FLUSH RAFTER #8 x 1-1/2" Wood Screw #8 x 1-1/2"...
  • Page 37 STEP 12: ROOF FRAME ASSEMBLY (CONT'D) BAG # HARDWARE 1701PC #8 X 1-1/2" WOOD SCREW X 32 • FASTEN ALL RAFTERS TO CORNER RAFTERS AS SHOWN BELOW. STRAP #8 X 1-1/2" WOOD SCREW FLUSH RAFTER CORNER RAFTER ROOF FRAME ASSEMBLY X4...
  • Page 38 STEP 13: RAFTER BRACKETS BAG # HARDWARE 1498BZ 5/16" X 2-1/4" HEX BOLT X 20 1336BZ 5/16" REGULAR WASHER X 40 1396BZ 5/16" LOCK NUT X 20 14-18-6090-RB RAFTER BRACKET X 20 • LINE-UP RAFTER BRACKETS WITH RAFTERS HOLE AS SHOWN BELOW. •...
  • Page 39 STEP 14: PEAK BRACKET ASSEMBLY STEP 14: PEAK BRACKET ASSEMBLY BAG # HARDWARE 16-16-9291-PB PEAK BRACKET 1390BZ 3/8" X 1-1/4" CLOSED EYE BOLT 1" DIA. WITH SHOULDER X 1 1318BZ 3/8" REGULAR WASHER 1320BZ 3/8" LOCK NUT • ASSMEBLE THE ROOF PEAK ASSEMBLY AS SHOWN BELOW. (FIG 15.1) •...
  • Page 40 STEP 15: HANGING ROOF & PEAK BLOCK STEP 15: HANGING ROOF & PEAK BLOCK STAMP ID WOOD COMPONENTS BAG # HARDWARE PEAK BLOCK 1327PC #8 X 2-1/2" WOOD SCREW • HANG TWO ROOF FRAME ASSEMBLIES ON TOP OF THE BEAMS AS SHOWN BELOW. (FIG 14.1) NOTE: BRACKETS MUST FACE OUTWARD/ BEAM SIDE •...

  • Page 41: Step 16: Roof Assembly

    STEP 16: ROOF ASSEMBLY BAG # HARDWARE 1724BZ #14 X 1-1/2" PAN HEAD SCREW X 2 • • SWING UP BOTH ROOF FRAME ASSEMBLIES AND REST ON PEAK BLOCK AT THE TOP. (FIG 16.1) SWING UP BOTH ROOF FRAME ASSEMBLIES AND REST ON PEAK BLOCK AT THE TOP. (FIG 16.1) •...
  • Page 42 STEP 16: ROOF ASSEMBLY (CONT'D) • PLACE THE ADDITIONAL ROOF FRAME ASSEMBLIES ON TOP OF THE BEAMS AS SHOWN BELOW. • ASSISTANCE REQUIRED ALL RAFTER BRACKETS WILL BE RESTING ON BEAM...
  • Page 43 STEP 16: ROOF ASSEMBLY (CONT'D) BAG # HARDWARE 1719BZ 1/4" X 2-3/4" HEX BOLT X 12 1499BZ 1/4" WIDE WASHER X 24 1386BZ 1/4" LOCK NUT X 12 • LINE-UP ALL HOLES AND INSERT HARDWARE AS SHOWN BELOW. • HAND TIGHTEN ALL HARDWARE. ASSEMBLY MUST REMAIN LOOSE FOR ADJUSTMENT IN FURTHER STEPS.
  • Page 44 STEP 17: ADJUSTING ROOF • PUSH UPWARD IN CENTER OF ROOF UNTIL ALL CORNERS ARE TIGHT AS SHOWN BELOW. • YOU MAY HAVE TO REMOVE ONE SCREW FROM PEAK BRACKET ASSEMBLY TO LOOSEN UP THE ROOF FRAMES FROM EACH OTHER. •...
  • Page 45 STEP 18: CORNER SEAMS & HIP BRACKET BAG # HARDWARE 1327PC #8 X 2-1/2" WOOD SCREW 1725BZ #8 X 1-1/2" PAN HEAD SCREW X 16 • FASTEN EACH CORNER SEAM AS SHOWN BELOW. (FIG 18.1) • FASTEN HIP BRACKET AT EACH CORNER AS SHOWN BELOW. (FIG 18.2) FIG 18.1 TIGHT SEAMS #8 x 2-1/2"...
  • Page 46 STEP 19: TIGHTENING ROOF HARDWARE BAG # HARDWARE 1491BZ #12 X 1-1/2" PAN HEAD SCREW X 40 1724BZ #14 X 1-1/2" PAN HEAD SCREW • TIGHTEN BOLTS AND NUTS ON HIP RAFTERS. • FASTEN ALL RAFTER BRACKETS AND PEAK BRACKET. HINT! FULLY TIGHTEN ALL BOLTS AND NUTS USE BAR CLAMPS TO FLUSH UP...

  • Page 47: Step 20: Top Trim

    STEP 20: TOP TRIM STAMP ID WOOD COMPONENTS BAG # HARDWARE TOP TRIM 1327PC #8 X 2-1/2" WOOD SCREW X 64 BEAM SUPPORT TRIM X 16 • ATTACH ALL TRIM TO 4 CORNERS AS SHOWN BELOW. #8 x 2-1/2" Wood Screw #8 x 2-1/2"...

  • Page 48: Step 21: Bottom Trim

    STEP 21: BOTTOM TRIM STAMP ID WOOD COMPONENTS BAG # HARDWARE BOTTOM TRIM 1327PC #8 X 2-1/2" WOOD SCREW X 64 BOTTOM TRIM NOTCHED X 8 1727Z 1/4" X 2" HEX LAG SCREW X 16 1499BZ 1/4" WIDE WASHER X 16 •...
  • Page 49 STEP 22: PLYWOOD STAMP ID WOOD COMPONENTS BAG # HARDWARE PLYWOOD CENTER 1701PC #8 X 1-1/2" WOOD SCREW X 24 • INSTALL AC FIRST. WITH STAMP ID UP. X4 (FIG. 22.1) • USE ONE #8 X 1-1/2" WOOD SCREW AT EACH CORNER OF PLYWOOD AS SHOWN. (FIG. 22.2) •...
  • Page 50 STEP 22: PLYWOOD (CONT'D) STAMP ID WOOD COMPONENTS BAG # HARDWARE PLYWOOD SIDE RH 1701PC #8 X 1-1/2" WOOD SCREW X 36 PLYWOOD SIDE LH PLYWOOD TOP • INSTALL AF , AB & Z WITH STAMP ID UP AS SHOWN. X4 (FIG. 22.4) •...
  • Page 51 STEP 22: PLYWOOD (CONT'D) BAG # HARDWARE 15119 1-1/2" RING SHANK NAIL X432 • HAMMER 1-1/2" RING SHANK NAILS AT 6" ON CENTER AT ALL EDGES, AND CHALK LINE MARKS AS SHOWN BELOW. X4 1-1/2" Ring Shank Nail 1-1/2" Ring Shank Nail SEAM 1-1/2"...
  • Page 52 STEP 23: DRIP EDGE MATERIALS REQUIRED BAG # HARDWARE DRIP EDGE 60ft 15110 3/4" ROOFING NAIL X 60 YOU MUST INSTALL DRIP EDGE TO VALIDATE YOUR WARRANTY (DRIP EDGE NOT INCLUDED) • INSTALL DRIP EDGE OVERLAPPING BY 2" FROM CENTER MARK. (FIG. 1.1) •...
  • Page 53 STEP 24: ROOF FELT (REQUIRED) STEP 24: ROOF FELT (REQUIRED) MATERIALS ROOF FELT 234 sq.ft. (ROOF FELT NOT INCLUDED) (9/16" OR SHORTER STAPLES NOT INCLUDED) • INSTALL FELT (NOT INCLUDED)FLUSH TO ALL ROOF EDGES OVERLAPPING 3". USE 9/16" OR SHORTER STAPLES. (STAPLES NOT INCLUDED) •...
  • Page 54 STEP 25: SHINGLES (NOT INCLUDED) STEP 25: SHINGLES (NOT INCLUDED) MATERIALS REQUIRED BAG # BAG # HARDWARE HARDWARE 3-TAB SHINGLES 9 Bundles 15110 3/4" ROOFING NAIL X 875 15110 3/4" ROOFING NAIL X 875 ARCHITECTURAL ONLY USE 7 Bundles SHINGLES 3-TAB SHINGLES FOR SEE SHINGLE MANUFACTURER FOR SEE SHINGLE MANUFACTURER FOR...

  • Page 55: Center Mark

    STEP 25: SHINGLES (CONT'D) • INSTALL FIRST ROW OF SHINGLES FLUSH TO CENTER LINE AND DRIP EDGE AT BOTTOM. (FIG. 3.3) • USING YOUR SHINGLE HOOKED BLADE CUT SHINGLES ALONG RIDGE LINE. (FIG. 3.5) • CONTINUE INSTALLING ROWS OF SHINGLES BY SHIFTING TO THE LEFT PER MANUFACTURER'S GUIDELINES.
  • Page 56 STEP 25: SHINGLES (CONT'D) • CONTINUE INSTALLING ROWS OF SHINGLES TO THE PEAK (FIG. 3.6)(FIG. 3.7) • USING YOUR SHINGLE HOOKED BLADE CUT SHINGLES ALONG RIDGE LINE.(FIG. 3.8)(FIG. 3.9) NOTE: REPEAT THIS PROCESS ON REMAINING THREE SIDES OF ROOF !! FIG.

  • Page 57: Step 26: Ridge Cap

    STEP 26: RIDGE CAP BAG # HARDWARE ONLY USE 3-TAB 15103 1" ROOFING NAIL X 175 SHINGLES FOR RIDGE CAPS. (X30) FOR RIDGE CAPS • CUT SHINGLES INTO THREE PIECES. (FIG. 4.1) • INSTALL FIRST RIDGE CAP FLUSH TO CORNER END OF RIDGE AND CENTER AS SHOWN. (FIG. 4.2) &...
  • Page 58 STEP 26: RIDGE CAP (CONT'D) BAG # HARDWARE 15103 1" ROOFING NAIL X 175 RIDGE CAP X 90 • • INSTALL SECOND RIDGE CAP PER MANUFACTURER'S GUIDELINES AS SHOWN. (FIG. 4.4) INSTALL SECOND RIDGE CAP PER MANUFACTURER'S GUIDELINES AS SHOWN. (FIG. 4.4) •...
  • Page 59 STEP 26: RIDGE CAP (CONT'D) BAG # HARDWARE PEAK CAP X2 15103 1" ROOFING NAIL X 175 • CUT-OFF TWO RIDGE CAPS TO CREATE TWO PEAK CAPS AS SHOWN. (FIG. 4.6) • INSTALL PEAK CAPS IN A CROSS PATTERN TO PROTECT PEAK FROM RAIN. SECURE WITH TWO ROOFING NAILS PER SIDE AS SHOWN.
  • Page 60 NOTES...
  • Page 61   LIMITED CONDITIONAL WARRANTY*    Backyard Storage Solutions, LLC warrants the following:  1. Every product is warranted from defects in workmanship and manufacturing for one (1) year from the original date of  purchase.  2. All accessories, hardware and metal components are warranted for one year.  3. Cedar lumber is warranted for five (5) years against rot and decay.  4. This product is warranted for RESIDENTIAL USE ONLY.  5. This Limited Warranty does not cover minor or cosmetic defects in wood such as knots, checks (splits, cracks), minor  twisting and warping over time, or any other natural occurring properties of wood that do not affect the performance or  integrity of the structure.    Backyard Products LLC will repair, replace or pay for the affected part. In no event shall Backyard Products, LLC pay the cost of  inspection, labor or installation or any other costs related thereto. All warranties are from date of purchase. If a cash refund is paid  on an affected part, it will be prorated from the date of purchase.     CONDITIONS   The warranty is effective only when:  1. The unit has been erected in accordance with the assembly instructions.  2. The unit has been properly shingled, roof felt and drip edge installed, and regularly maintained.  3. The structure is properly leveled and anchored. Failure to anchor will void your warranty.  4. The failure occurs when the unit is owned by the original purchaser and is not transferable.  5. Any modifications made to the original structure could damage the structure or result in structural failure. Backyard  cannot assume any responsibility for modifications to the structure. Modifications to the structure voids any and all  warranties.  6. Backyard Products, LLC has received the warranty registration within thirty (30) days of purchase and notification of the  failure in writing within the warranty period specified above.  7. Backyard Products, LLC has had reasonable opportunity during the sixty (60) days following receipt of notification to  inspect and verify the failure prior to commencement of any repair work.    REQUIREMENTS   To validate your warranty, it is necessary to properly maintain your Backyard Products, LLC unit. This includes shingling the roof, roof  felt, drip edge installation, treating the wood on your pavilion with an exterior grade wood preservative, water‐repellent or stain.  Brackets and fasteners which indicate rust or chipping of painted surfaces should be sanded, primed and painted to maintain  appearance and longevity. Maintenance must be done regularly or as needed to maintain your warranty. Keep vegetation trimmed  away from structure. Water from sprinklers must be kept off unit. Avoid installing the structure in standing water or areas that  collect water.    In no event will Backyard Products, LLC be responsible for any indirect, incidental, consequential or special damages, vandalism, nor  for failure(s) that are caused by events, acts or omissions beyond our control including, but not limited to, misuses or improper ...

Table of Contents