Advertisement
Lens Swap Instructions (uService):
This kit includes optional lenses to swap out for different patterns. These lenses can be installed by simply removing the 4 allen head bolts using a 2.5mm allen
wrench on the bezel of the light.
Remove the o-ring and place it in the lens you'd like to install.
Make sure that the o-ring is properly fitted when installing the lens onto the housing. The o-ring is not directional and can be installed in any position.
Reinstalling the bezel will give you a brand new lens and pattern, depending on your preference.
The bezel should be torqued to 8 ft./lb. in a "criss-cross" pattern.
Advertisement
