Advertisement
consequential damages, nor shall seller's liability on any claim for damages arising out of or connected with the sale, delivery, or use of purchased products
and/or supplies exceed the purchase price of the products and/or supplies.
Customer satisfaction stands at the core of who Baja Designs is as a company. BD gives you a full 30 days to test out your new light and if you are not 100%
satisfied with your purchase, you can send it back for an exchange or refund of the purchase price and applicable tax.
Exclusions:
Items purchased through a Baja Designs authorized dealer must be returned through the dealer. Only available on LED auxiliary lights and product must be in sellable condition at
MSRP. Product that has been damaged in any way after the original purchase date will be excluded from this guarantee.
Thank you for purchasing the Baja Designs. Baja Designs XL Pro, XL-R Pro, XL Sport & XL-R Sport LED auxiliary lights have a microprocessor that performs thermal
management of the LED's and allow a dimming mode. If you want to use the dimming mode of the light, a separate on/off (toggle) or push button switch is required. If
you do not need this feature, then a single standard on/off switch is all that is required.
Black (-)
White (+)
Green (Control)
When using the optional On/Off (Toggle) or Push Button Switch, depressing the switch will dim the light to 50% power. Depressing the switch again will toggle back to full
power.
Moisture Block: The Moisture Block functions exactly to its name, completely blocking moisture or water from climbing its way down the cord into your LED light. You can
even cut the connector off without voiding your warranty.
Please read this manual prior to installation.
Connector Wiring (WeatherPak 3 Pin Connector)
Chassis
Wiring Connector
A
XL
Connector
B
C
Ground
On/Off Switch
On/Off (Toggle) or Push
Button Switch
(Optional for Modes)
12-30
VDC+
Ground
Advertisement
