TSO Products TPG Series User Manual

User Guide for TPG Parallel Guide System
Should you have any product questions or issues, please contact us toll-free at 800-727-0311 (U.S.), 239-236-5526 (international),

Introduction

The patent-pending TPG Parallel Guide System attaches quickly and easily to the TSO GRS-16 Guide Rail
Square with a tool-free design utilizing comfort grip knobs that work with or without work gloves.
Calibration is simple, effective and maintained even when the guide rail square is removed, stowed away,
and re-deployed.
assembled for LEFT Hand and RIGHT Hand T-tracks. The appropriate configuration is
included with each set of T-tracks. The Flip-Stops are now designed to be reversible
LEFT / RIGHT for user disassembly and reconfiguration. These Flip-Stops feature a
unique parallax-free viewing cursor enabling fast, accurate adjustment.
Attachment of the Flip-Stop to the T-Track uses TSO's distinctive keystone clamp with
self-aligning feature, torpedo-shaped nut plate for easy insertion, and generously sized
knobs for user comfort. Optionally, additional Flip-Stops can be purchased separately and added to the same
T-Track, providing more convenience when making cuts of multiple widths.
Publication 696-009 Rev C
Effective 07/01/2019
Thanks for purchasing this genuine TSO Product.
or email us at info@tsoproducts.com.
The TPG Parallel Guide T-Track is a proprietary aluminum extrusion incorporating a
t-slot compatible with Festool® and Makita® guide rails. The TPG-20 and TPG-30
T-tracks feature a permanent laser-engraved scale in both inches and millimeters,
while the longer TPG-50 T-Tracks come with an applied Starrett® scale in both
inches and millimeters.
The TPG Parallel Guide Flip-Stops are precision machined and
©2019 TSO Products Page 1 of 3