Before You Call For Service - Sharp Microwave Drawer SMD2489ES Operation Manual

Please check the following before calling for service. It may save you time and expense.
PROBLEM
Part or all of Micro-
1
wave Drawer does not
operate.
Food in Microwave
2
Drawer is not heated.
Microwave Drawer
3
light does not work.
Touch controls will not
4
operate.
Display flashes.
5
Steam from the vent.
6
POSSIBLE CAUSE
• Power cord of Microwave Drawer is not
completely connected to the electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesn't work.
• Microwave Drawer is in Demo Mode.
• No power to the appliance.
• Drawer controls improperly set.
• Drawer is in Demo Mode.
• Light bulb is loose or burned out.
• Control Lock is on.
• Power failure.
• During microwaving, water vapor may come
from the left side of the vent (when facing the
microwave).

BEFORE YOU CALL FOR SERVICE

• Make sure the power cord is tightly connected
to the outlet.
• Check house lights to be sure. Call your local
electric company for service.
• Replace the fuse or reset the circuit breaker.
• See page 20 for how to cancel Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly set.
• See page 20.
• Call for service.
• See page 21 to unlock.
• Touch Clear pad and reset the clock. If the
Microwave Drawer was in use, you must reset
the cooking function.
23
SOLUTION