Summary of Contents for Vent-Axia Normal Boost Purge Switch
- Page 1 Normal Boost Purge Switch Fitting & Wiring Instructions Stock Ref. 5108454 Normal boost Purge Switch 10A ~ 250V PLEASE RETAIN THESE INSTRUCTIONS WITH THE PRODUCT.
- Page 2 Ambient temperature range: 0 to 40 ° C. Site away from direct sources of heat. Do not site above a radiator or other heat source. FITTING The Normal Boost Purge switch is designed to fit any UK single back box with a minimum depth of 20mm. Fixing centres 60.3mm. A surface mounting box is available (Vent-Axia Ref. 410020). WIRING WARNING: For your safety please ensure that the mains supply is isolated before making electrical connections.
- Page 3 Fig.1. Wiring a HR200WK & HR200WJ to enable switching between Normal, Boost & Purge speeds Fig.2. Wiring a MV250 to enable switching between Normal (Low), Boost (Med) & Purge (High) speeds...
- Page 4 Vent-Axia guarantees its products for two years from date of purchase against faulty material or workmanship. In the event of any part being found to be defective, the product will be repaired, or at the Company’s option replaced, without charge, provided that the product:- ...
Need help?
Do you have a question about the Normal Boost Purge Switch and is the answer not in the manual?
Questions and answers