Advertisement
Quick Links
EUROFLOW KDF FANS
INSTALLATION AND WIRING INSTRUCTIONS
EUROFLOW RECTANGULAR DUCT FANS
KDF200-14V, KDF225-14V, KDF250-14V, KDF280-34V, KDF315-34V
This product is manufactured to conform with the requirements of the
following European Directives:
Electromagnetic Compatibility 89/336/EEC
Low Voltage 73/23/EEC
SAFETY INSTRUCTIONS FOR AIR MOVING EQUIPMENT
Air moving equipment may present mechanical, electrical or noise hazards. To minimise risks associated with
these potential hazards, it is essential that safety, installation, operation and maintenance instructions are
followed. Implementation of these instructions should always be undertaken by technically competent
personnel.
Potential mechanical hazards must be eliminated by guarding against access to the rotating parts whilst the air
moving equipment is operating. A range of guards are available for this purpose from Vent-Axia.
Installation work, both mechanical and electrical, must be undertaken in accordance with the safety and
installation instructions before switching on the unit.
Maintenance work should not be attempted before first switching off and isolating the fan and its control from
the electrical supply and ensuring that it cannot be accidentally turned back on again. It is essential to ensure
that rotating parts have come completely to rest before maintenance work commences.
Air moving equipment may generate unacceptable noise levels when in operation. Actual sound levels are
indicated in the Vent-Axia Industrial Range catalogue for each product, and it may be necessary to take
appropriate action to reduce sound levels. A range of products are available for this purpose from Vent-Axia.
PLEASE LEAVE THESE INSTRUCTIONS WITH THE END USER
Advertisement
Related Manuals for Vent-Axia EUROFLOW KDF Series
Summary of Contents for Vent-Axia EUROFLOW KDF Series
- Page 1 Air moving equipment may generate unacceptable noise levels when in operation. Actual sound levels are indicated in the Vent-Axia Industrial Range catalogue for each product, and it may be necessary to take appropriate action to reduce sound levels. A range of products are available for this purpose from Vent-Axia.
- Page 2 VENT-AXIA EUROFLOW FANS INSTALLATION AND WIRING INSTRUCTIONS IMPORTANT - READ THESE INSTRUCTIONS FULLY BEFORE COMMENCING INSTALLATION GENERAL WIRING WARNING - ISOLATE MAINS SUPPLY BEFORE MAKING CONNECTIONS - THIS EQUIPMENT MUST BE EARTHED NOTES ON RUNNING Before switching on CHECK: ROUTINE INSPECTION/MAINTENANCE THIS MUST BE UNDERTAKEN BY A COMPETENT PERSON.
-
Page 3: Wiring Diagrams
3mm and suitably sized fuses or circuit breaker. When wiring in conjunction with a speed controller, a 5-Step Auto-Transformer is recommended to ensure low noise levels. Please consult your nearest Vent-Axia Sales Centre for the latest range of suitable controllers. - Page 4 ‘Guarantee Claim’ stating the nature of the fault and providing evidence of date and source of purchase. As part of the policy of continuous product improvement Vent-Axia reserves the right to alter specifications without notice. Head Office: Fleming Way, Crawley, West Sussex RH10 9YX...