Table of Contents
Advertisement
Quick Links
Thank you for choosing the BEINAT S.r.L. digital tool, model TS1007.
This manual was designed to help you obtain the best results and efficiency from the product.
Important Note
Read these instructions carefully before use and always keep them within hands reach while using the
instrument.
The illustrations and texts shown on the screens in this manual may differ from those actually displayed
The brand products BEINAT S.r.L.
2006/66/EC RAEE 2003/96/EC
User Guide
Tester control gas probes TS1007
comply with European Directives ROHS 2002/95/EC, REACH 1907/2006, BATTERIES AND ACCUMULATORS
CONFORMITY
Electric connections also available on
Channel: Beinat gas solutions
Belonging
to
Vers. 01
EN 50194
CEI 216-3
EN 50270
Advertisement
Table of Contents
Related Manuals for BEINAT TS1007
Summary of Contents for BEINAT TS1007
- Page 1 Belonging Tester control gas probes TS1007 Vers. 01 Thank you for choosing the BEINAT S.r.L. digital tool, model TS1007. This manual was designed to help you obtain the best results and efficiency from the product. Important Note Read these instructions carefully before use and always keep them within hands reach while using the instrument.
- Page 2 Main features From the experience since 40 years and the requirements of the rules of the test, BEINAT Srl has built a new tool Tester TS1007 for its own products. Mainly this new device is suitable to test all conventional probes to detect explosive and toxic gas manufactured...
- Page 3 Precautions To achieve long, satisfactory use of the TS1007 digital device, use and store it in compliance with the following precautions. ENSURE the device is intact after removing it from the packaging. Any use other than the designed use of the detector is considered improper and BEINAT S.r.l. declines all liability for any damage caused to people, animals or property.
- Page 4 Recharge from PC Recharge from AC 230V Print IR Indicator of the level of residual battery Technical data of LITHIUM POLYMER Battery TS1007 Nominal voltage of the battery pack 3,7V. , current 1200 mA. Operating time 380 hours approx with charged batteries Battery charging time approx 6 hours.
- Page 5 Full segments: battery charging. Empty segments: low battery DISPLAY Il display of TS1007 is alphanumeric and is used to display the following information: 3) Unit of measure “LEL” for explosive gas; “ppm” for the toxic gas, the exchange is done automatically according to the type of probe.
- Page 6 Modification: “TAR” multiplicative factor depending on the type of gas. Every time you disconnect the tester from the probe appears “PRINT”. The TS1007 has loaded in memory the data stored in the probe and asked to print them. print If you do not want to print, turn off the tester or connect it to another probe.
- Page 7 Check that the instrument is in line with the printer. Check that the printer is turned on and is in line with the instrument. In the event other problems arise, directly contact a specialist and/or authorised technician or your BEINAT S.r.l. dealer.
- Page 8 The BEINAT S.r.L. company is not liable for possible damage, direct or indirect, to people, animals, or things; from product faults and from its enforced suspension of use.
Need help?
Do you have a question about the TS1007 and is the answer not in the manual?
Questions and answers