Advertisement
Cleaning Instructions for the Semak Coffee Percolator
If the percolator is used daily, it is recommended that the unit be cleaned once a
month by scouring the heating element, stem and basket with a nylon scouring pad.
Clean the gauge tube by removing the top cap and remove the glass tube then insert
brush supplied and scrub in hot soapy water. Clean the tap by unscrewing the top cap
and cleaning away the built up residue. Clean the outside of the percolator with a
good stainless steel cleaner and polish with a dry cloth.
Service & Maintenance
The Semak Coffee Percolator does not contain user-serviceable parts. For Service and
Repair, contact Semak for your nearest Authorised Service Agent.
The Foodservice Industry is deemed a hostile environment within the scope of
AS/NZS 3760:2003. Semak Coffee Percolator MUST be routinely electrically tested for
compliance with this standard if used commercially.
It is recommended that a Food Safety program such as HACCP be employed and that
routine service and repair be undertaken at the time of electrical testing to ensure
the correct operation and function of all parts.
Electrical Compliance
Semak Coffee Percolators comply with the following electrical standards
CISPR 14
Warranty
The Semak Coffee Percolator is a Commercial appliance. This product is guaranteed
for 2 Years from the date of purchase against mechanical and electrical defects. If the
fault is deemed caused by MISUSE/ABUSE the terms of the warranty are invalidated.
If the product has been opened or tampered with (ie. In an attempt to repair it) the
warranty is invalidated. All warranty repairs should be undertaken by Dimark
Commercial Pty. Ltd.
It is against company policy to authorize warranty repairs over the phone. Service
Agents will require a work order number from Semak to conduct warranty repairs.
Page | 7
Advertisement
