Related Manuals for SAINT-GOBAIN ONESuit Flash
Summary of Contents for SAINT-GOBAIN ONESuit Flash
- Page 1 ONESuit® Flash and ONESuit® Gard User Guide and Technical Manual THiS uSEr iNFOrmATiON iS TO bE rEmOvEd ONLY bY THE ENd uSEr A Singular Approach to Hazmat Protection Cert. Model – NFPA 1991 (2005 ed.)
- Page 2 • Maximum safety and lightweight comfort • Full protection without a cumbersome over-cover • Single-skin convenience at a competitive price • ONESuit® Flash is certified to the Chemical Flash Fire Protection Performance under NFPA 1991...
-
Page 3: Table Of Contents
Table of Contents 1. Introduction to ONESuit® Gard and ONESuit® Flash p. 2 Compliance statements Description of materials 2. User Guide p. 4 A. Pre-Use Information Safety considerations Limitations of use Marking restrictions Shelf life Visor anti-fog procedure Recommended undergarments p. -
Page 4: Introduction To Onesuit® Gard And Onesuit® Flash
SECTION : Introduction to ONESuit® Gard and ONESuit® Flash ONESuit® Gard is designed • Ease of storage and Compliance statements to meet the real-world needs handling due to lightweight, ONESuit® Gard and ONESuit® of those who work in the most compressible design Flash are designed with the dangerous environments. -
Page 5: Description Of Materials
Flash use only materials that have Saint-Gobain Performance two exhaust valves passed the most rigorous testing. Plastics. Outstanding manufactured by Saint-Gobain protective gloves featuring Performance Plastics; they are • Garment Material single-piece construction and attached to the suits using a - Garment barrier fabric for excellent dexterity. -
Page 6: User Guide
3. If the following symptoms for both ONESuit Gard and within a sure grip cleated are experienced, the user ONESuit Flash based on specified outsole; (p/n 82330, 82331, MUST leave the “hot zone”: storage conditions, maintenance, sizes 7-13). -
Page 7: Preparation For Use
X- Large 72 - 76 180 - 230 XX-Large 74 - 78 210 - 260 XXX-Large 76 - 80 240 - 290 These measurements are only guidelines. Please consult a Saint-Gobain Performance Plastics representative if unsure of your optimal size. -
Page 8: Donning/Doffing Information
SECTION 2C: User Guide Donning/Doffing Information To don the suit: To doff the suit: Donning and doffing procedures ONESuit® Gard and ONESuit® 1. Choose a location that offers 1. Reverse the order of steps Flash are designed to be donned a clean place to stand and has followed when donning and doffed with great ease. -
Page 9: Maintenance And Cleaning Information
ANY RETURNED SUIT MUST BE ACCOMPANIED BY COMPLETED COMMERCIALLY AVAILABLE Inspection and SAINT-GOBAIN SUPPLIED FORMS PRESSURE TEST KITS CAPABLE OF pressure test details A visual inspection and pressure TO CONFIRM THAT IT IS NOT TESTING TO ASTM F1052 MAY BE test of these products must be CONTAMINATED. -
Page 10: Glove Replacement Procedure
SECTION 2D: User Guide Maintenance and Cleaning Information (continued) 5. Fold the elastic portion of 11. Cover clamp with the large Glove replacement procedure If the gloves have been visibly the glove toward the fingers rubber band, then wrap damaged or worn, or cause so that the gauntlet of the rubber band area over the the suit to fail the pressure test,... -
Page 11: Nfpa 1991-2005 Edition Approval Data
SECTION 3: NFPA 1991-2005 Edition Approval Data Certified Model – NFPA 1991, 2005 ed. PHYSICAL PROPERTIES AND GARMENT TESTS/ONES GARD AND ONES FLASH ® ® property method requirement result Liquid Tight Integrity NFPA 1991 8.3 No penetration Pass Ending Suit Pressure NFPA 8.4 ≥... - Page 12 SECTION 3: NFPA 1991-2005 Edition Approval Data (continued) GARMENT MATERIAL PERMEATION /ONES GARD AND ONES FLASH (after Flex and Abrasion) ® ® chemical or biological agent method requirement result Acetone > 480 Acetonitrile > 480 Ammonia > 480 1,3-Butadiene > 480 Carbon Disulfide >...
- Page 13 VISOR MATERIAL PERMEATION/ONES GARD AND ONES FLASH ® ® chemical or biological agent method requirement result Acetone > 480 Acetonitrile > 480 Ammonia > 480 1,3-Butadiene > 480 Carbon Disulfide > 480 Chlorine > 480 Dichloromethane > 480 Diethyl Amine >...
- Page 14 SECTION 3: NFPA 1991-2005 Edition Approval Data (continued) VISOR SEAM PERMEATION/ONES GARD AND ONES FLASH ® ® chemical or biological agent method requirement result Acetone > 480 Acetonitrile > 480 Ammonia > 480 1,3-Butadiene > 480 Carbon Disulfide > 480 Chlorine >...
- Page 15 GARMENT SEAM PERMEATION/ONES GARD AND ONES FLASH ® ® chemical or biological agent method requirement result Acetone > 480 Acetonitrile > 480 Ammonia > 480 1,3-Butadiene > 480 Carbon Disulfide > 480 Chlorine > 480 Dichloromethane > 480 Diethyl Amine >...
-
Page 16: Inspection Log
SECTION 4: Inspection Log Purchase Date:__________________________________ Purchased From: ________________________________ INSPECTION DATE INSPECTED BY PRESSURE TEST RESULT* COMMENTS (AFTER 4 MINUTES @ 4 H 2 O) Removed from Service Date:__________________________________________ Reason for Service Removal: __________________________________________ *Minimum pressure requirement after 4 minutes is 3.2" H 2 O. -
Page 17: Disclaimers And Warnings/Warranty
Technical Guide (the “Technical abraded, ripped or punctured, or Manual”) is based on technical data and the integrity of the Suit is otherwise other information that Saint-Gobain compromised in any way (collectively Performance Plastics (SGPPL) believes to be “Damaged”), the purchaser and/or end reliable. - Page 18 Thank you for choosing ONESUIT®. At Saint-Gobain Performance Plastics, your safety is our only concern. If you have any questions or comments, please don’t hesitate to contact us directly. Certified Model – NFPA 1991, 2005 ed. Saint-Gobain Performance Plastics 701 Daniel Webster Highway Merrimack, NH 03054 Tel: 603.424.9000...
Need help?
Do you have a question about the ONESuit Flash and is the answer not in the manual?
Questions and answers