Connecting Speakers - Speco P120FACD/P240FACD Operation Manual

Connecting Speakers

Connecting Speakers
Before connecting speakers, disconnect the AC power cable. Note the proper connecting terminals as shown
below. Make certain that the total impedance is not less than the rated impedance indicated.
HIGH IMPEDANCE SPEAKER INSTALLATION
Total power sum of all zones (1~5) must not exceed the rated power.
P120FACD : 120W, P240FACD : 240W
Do not use 8Ω speaker terminal and high impedance speaker terminals (1~5) at the same time.
Output
Model Name
P120FACD
P240FACD
NOTE : Be sure that total impedance is not less than the rated impedance. (See upper chart.)
Do not connect the low impedance speaker to the high impedance terminals.
WARNING : Extreme care must be exercised when connecting high-impedance systems, as potentially
hazardous voltages may be present at these terminals.
Do not install this equipment in a confined space with less than adequate ventilation.
8Ω (LOW IMPEDANCE)
31V/8Ω (120W)
43.8V/8Ω (240W)
PUBLIC ADDRESS AMPLIFIER
SPK1~5 (HIGH IMPEDANCE)
70V/41Ω
70V/21Ω
P120FACD/P240FACD
11