Dealer Inspection & Service - Sea Quest Pro QDi3 Owner's Manual

Buoyancy compensator
Table of Contents

Advertisement

DEALER INSPECTION & SERVICE
WARNING: DO NOT attempt to perform any disassembly or service of
your BC. Service requiring disassembly must only be performed by a
factory-trained Aqua Lung/SeaQuest technician. To obtain service or
repair, such as power inflator service or replacement of the bladder,
see your local authorized dealer.
. It cannot be assumed that the BC is in good working
order on the basis that it has received little use since it was
last serviced. Remember that prolonged or improper storage
can still result in internal corrosion and/or deterioration of
o-ring seals and valve springs, as well as bladder seam
degradation.
. It is imperative that you obtain prescribed dealer service for
your BC at least once a year from an authorized dealer, including
a general air leak inspection and complete overhaul of the i3
Control Unit and Flat E-Valve. Your BC may require this
service more frequently, depending on the amount of use it
receives and the environmental conditions it is used in.
3. If the BC is used for rental or training purposes in salt,
chlorinated, or silted fresh water, it will require prescribed
dealer service every three to six months. Use in chlorinated
water will greatly accelerate the deterioration of most
components, and require more frequent service.
4. DO NOT attempt to perform any disassembly or overhaul
service of your BC. Doing so may cause the BC to dangerously
malfunction, and will render the warranty null and void. All
service must be performed by an authorized Aqua Lung/
SeaQuest Dealer.
IT IS IMPORTANT TO OBTAIN PRESCRIBED DEALER
SERVICE FOR YOUR BC AT LEAST ONCE ANNUALLY, FROM
AN AUTHORIZED AQUA LUNG/SEAQUEST DEALER. YOUR
PERSONAL SAFETY AND THE MECHANICAL INTEGRITY OF
Pro QDi3 BC Owner's Manual
YOUR BC DEPENDS ON IT.
7

Advertisement

Table of Contents
loading

Table of Contents