Interface & Ports SNOOZE button DIMMER button ALARM ON-OFF button ALARM HR set button ALARM MIN set button DC Power In Port Security Cover Specifications Power ......................... DC 5V 3A Adapter AC Power Supply ..................100-240V ~ 50/60Hz 0.5A USB Charging Ports ......................1A / 2.4A...
flashing "20." Press the HR /MIN button to set the Cover can be fastend over the ports by inserting year. into the tab on the back of Station O and then 3. Press “SNOOZE” button to enter date setting secured with a two screws.
Setting the Alarm USB Charging To set the alarm time, press the HR button and MIN The Station O features dual USB charging ports button to change the alarm time. (1A/2.4A) on the front of the unit which are designed to charge most USB compatible devices.
SAFETY PRECAUTIONS 12. Refer all servicing to qualified service personnel. Servicing is Some of the following information may not apply to your particular product; however, as with any electronic product, required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has precautions should be observed during handling and usvve.
Supplier’s Declaration of Conformity • Reorient or relocate the receiving antenna. Product Name: Station O • Increase the separation between the equipment and Model number: NSO receiver. • Connect the equipment into an outlet on a circuit Responsible party: different from that to which the receiver is connected.
Page 9
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.