Page 2
NOTE: All utility and driver software provided to operate Activ products is the property of Promethean. Use of this software is granted for the purpose of installation, set up and operation of Activ products and the standard feature set outlined in this guide. Promethean does not encourage or authorise any other use.
Install or upgrade the software. Make sure the Activslate is fully charged. Plug in the Activhub. Click and hold the Power On/Off button to switch on the Activslate. To register and activate your Activslate, follow the instructions for Activprimary/Activstudio and Windows/Mac.
Activstudio version 3.0.96 or later Activprimary version 3.0.96 or later Activdriver version 2.3.110 or later If you already have Activstudio or Activprimary installed on your computer, the CD-ROM supplied with your Activslate automatically upgrades the software if necessary. install/upgrade the softWare Windows ®...
LCD screen Drawing area How to charge the Activslate The Activslate is supplied with a partially charged battery. You are advised to charge the battery completely before using the Activslate. Insert the connector from the power supply cable into the Activslate charging socket, then plug into the mains supply.
The Activhub is needed to communicate between the Activslate and your computer. Insert the Activhub into a USB socket on your computer. Use the 1.8m (6ft) USB extension cable if necessary. The function indicator light is red when it has power. The light flashes green when the Activhub is working.
1. Launch Activstudio. 2. Click on the Main Menu button. 3. Select Customize>Tool Store. 4. Drag the Activslate icon from the Power Tools section of the Tool Store to the Main toolbox. 5. Close the Tool Store. Register and activate the Activslate 1.
Page 9
1. Launch Activstudio. 2. Click on the Main Menu button. 3. Select Customize>Tool Store. 4. Drag the Activslate icon from the Power Tools section of the Tool Store to the Main toolbox. 5. Close the Tool Store. Register the Activslate 1.
Page 10
8. Enter the number of Activslates you want to register. 9. Click OK. 10. Follow the on-screen instructions. 11. Click Exit on the Activslate Registration 2.4GHz box. The registered Activslate now appears in the Activslate 2.4GHz box. 12. Click on the Activslate to activate it.
Page 11
4. Select Activslate. 5. Click the Activslate icon. 6. Select Activslate. 7. Select the Activslate you want to use in the Activslate box. 8. Close the Activslate box. Your Activslate will remain activated until you register and select a different Activslate.
Page 13
Power Supply Unit (PSU) branded “Promethean” type number FW7650L/05. This is the only approved type of PSU for charging the battery of this Activslate. Do not connect any other PSU to the Activslate system. The PSU uses interchangeable plugs which snap into the PSU main body, where an interchangeable plug is not available for your country an adapter is supplied with a suitable mains lead.
Page 14
This Class B digital apparatus complies with Canadian ICES-003. Europe The radio interface on the Activhub and Activslate model number PRM-RS2-01 is intended for use with other Promethean radio devices for operation in the following countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,...
Need help?
Do you have a question about the activslate and is the answer not in the manual?
Questions and answers