Samsung Fresh Access AN035NSEDAV/AA Installation Manual page 2

PLEASE READ THIS MANUAL BEFORE INSTALLING UNIT
Before installation, careful consideration must be given to how this system will operate if connected to
any other piece of mechanical equipment, i.e. a forced air furnace or air handler, operating at a higher
static. After installation, the compatibility of the two pieces of equipment must be confirmed by
measuring the airflow's of the Energy Recovery Ventilators. It is always important to assess how the
operation of any ERV may interact with vented combustion equipment (i.e. Gas Furnaces, Oil
Furnaces, Wood Stoves, etc.).
Never install a ventilator in a situation where its normal operation, lack of operation or partial failure
may result in the backdrafting or improper functioning of vented combustion equipment!!!
Products are designed and manufactured to provide reliable performance, but they are not guaranteed
to be 100% free of defects. Even reliable products will experience occasional failures, and this
possibility should be recognized by the user. If these products are used in a life support ventilation
system where failure could result in loss or injury, the user should provide adequate back-up
ventilation, supplementary natural ventilation or failure alarm system, or acknowledge willingness to
accept the risk of such loss or injury.
Your ventilation system should be installed in accordance with the local building code that is in
effect. In absence of such requirements, it is recommenced to check with local authorities having
jurisdiction in your area prior to installing this product
Note Warning/
Important
note
Information Technical
information
.
2
Practical tip