Table Of Contents - Melco N10 Quick Setup Manual

WARNING
English
This equipment is not waterproof. To prevent fire or electric hazards, do
not place any containers filled with liquid near this equipment (such as a
vase or floor pot) or expose it to dripping, splashing, rain or moisture.
WARNING
To prevent fire hazards, do not place any naked flame sources (such as a
lighted candle) on or near the equipment.
VENTILATION CAUTION
When installing the power unit of the N10, make sure to leave space
around the power unit for ventilation to improve heat radiation (at least 20
cm; 7.9 in. at top and rear, and 1 cm; 0.4 in. at each side).
Do not block the front of the unit such as with doors.
CAUTION
The power unit of the N10 should be connected to a properly-grounded
AC outlet.
Contents
WARNING
Slots and openings in the cabinet are provided for ventilation to ensure
reliable operation of the product, and to protect it from overheating. To
prevent fire hazards, the openings should never be blocked or covered
with items (such as newspapers, table-cloths, curtains) or by operating the
equipment on thick carpet or a bed.
CAUTION
The power unit of the N10 becomes warm, so be careful not to touch it to
avoid hazards.
Operating Environment
Operating environment temperature and humidity: +5°C to +35°C (+41°F
to +95°F); less than 80% RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed
to high humidity or direct sunlight (or strong artificial light).
Diagrams....................................................................................................... 1
Power On....................................................................................................... 5
Available Devices and Ports ......................................................................... 7
Importing Files............................................................................................... 8
Confirming Imported Files............................................................................. 9
Preparing Player............................................................................................ 10
Playing Files .................................................................................................. 11
Specifications................................................................................................ 12
Additional Support and Service .................................................................... 13