Preparing Player - Melco N10 Quick Setup Manual

Preparing Player

English
After turning it on, you may be able to play music files by changing
the input to USB. If you use any port other than the USB-DAC port,
music files may not be able to play properly. If you connect two or
more USB-DAC devices, only one device will be detected.
The N10/N100 has an Ethernet port that can connect a Network Audio Player directly. Using this port is recommended
for high quality audio playback. To play music files using a Network Audio Player, refer to the manual of the player
before playing. The N10/N100 will be used as a NAS (network-attached storage) device.
10
USB-DAC Network Audio Player
After turning it on, you may be able to play music files by changing
the input to music server or network. You can also use another
player on the network rather than the player connected to the player
port.