Mercedes-Benz VITO 639 2005 Wiring Diagrams page 18

D- Dynamo, negative
D+ Dynamo, positive
D2B IN Input, digital data bus
D2B OUT Output, digital data bus
Daten IR Infrared
DBE Overhead control panel
DFA hi.li. Rpm sensor output, left rear
DFA hi.re. Rpm sensor output, right rear
DFA-HR Rpm sensor output, right rear
DFHL Rpm sensor, left rear
DFHR Rpm sensor, right rear
DFVL Rpm sensor, left front
DFVR Rpm sensor, right front
Diag. Diagnosis
Diag. Sthzg Stationary heater diagnosis
DRS-1 Yaw rate and lateral acceleration sensor
DRS-AY Yaw rate and lateral acceleration sensor
DRS-Ref Yaw rate and lateral acceleration sensor
DRSS Yaw rate and lateral acceleration sensor
DS Pressure switch
E-A-Crash Input - analog signal - crash
E-A-Kupp. Input - analog - clutch switch
E-A-LSVK Input - analog - oxygen sensor
E-A-TMOT Input - analog - coolant temperature
E-F-KS Input frequency - knock sensor
E-F-KWDGB Input frequency - crankshaft sensor
E-F-NWHG Input frequency - camshaft Hall sensor
E-S-AUS Input - shift signal - off
E-S-FSMOEL Input - signal - oil fill level and temperature
E-S-KSK Input - shift signal - control shift contact
Copyright DaimlerChrysler AG 03.12.2005 CD-Ausgabe G/11/05 . This WIS print-out will not be recorded by Modification services. Page 4