1. Manuals
  2. Brands
  3. TellSystem Communication Manuals
  4. Transmitter
  5. EasyCon GSM
  6. Installation manual

TellSystem Communication EasyCon GSM Installation Manual

Hide thumbs Also See for EasyCon GSM:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installer and User Manual
Installation manual
EasyCon GSM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EasyCon GSM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TellSystem Communication EasyCon GSM

Summary of Contents for TellSystem Communication EasyCon GSM

  • Page 1 Installation manual EasyCon GSM...

  • Page 2: Table Of Contents

    EasyCon GSM tellsystem.eu Contents Description of device functions ................ page 3. Description of the terminal block ..............page 3. Installation instructions ..................page 3. LeD signals ....................... page 3. Reset (factory default) ..................page 4. Control with caller ID function ................page 4.

  • Page 3: Description Of The Terminal Block

    EasyCon GSM tellsystem.eu Description and functions of the device • the GsM communicator may be used as a complement to alarm control systems as a 2 input GsM transmitter. • capable of sending voice or sMs messages to 8 phone numbers. Voice messages with a length of up to 8 seconds can be sent concerning the 2 inputs and power failure.

  • Page 4: Control With Caller Id Function

    EasyCon GSM tellsystem.eu Green and red flashes at the same error code by the number of flashes: time 1 flash: GsM module initialisation 2 flashes: GsM module defective 3 flashes: sIM card not inserted 4 flashes: sIM card blocked by PIn code...

  • Page 5: Input Settings

    EasyCon GSM tellsystem.eu Input settings Inputs can be used in different operation modes [In (e.g.:1;2)tab/types of Input]: • 24h normal: continuously monitors input, in case of alarm sends signals. • on (e.g.:1;2) tab/Inverted operation: in normal position input expects short-circuit, if function is checked in normal position it expects cut.

  • Page 6: Life Signal

    EasyCon GSM tellsystem.eu Life signal settings can be made on Life signal tab: it is recommended to request a test message every week or every second week to check proper operation of device. Frequency (every 1-255 days) and time of message can be set. only full hours of the clock can be set: e.g.

  • Page 7: Description Of Sms

    EasyCon GSM tellsystem.eu Description of SMS For each input you may set a different sMs message and the phone numbers you wish to send them to. the sMs text message can not be more than 32 characters long; use of special characters is not recommended.
  • Page 8 EasyCon GSM tellsystem.eu Programming installation settings: ssssssss = the eight “s” letters determine whether you wish to send sMs to the phone numbers to be notified. If “s”=1 the device sends sMs; if 0 it does not. If you leave it blank, previous settings remain.

  • Page 9: Monitoring Station

    EasyCon GSM tellsystem.eu Monitoring station the module is capable of sending its signals in Contact ID format to a monitoring station through VoICe channel. Codes and zones might be edited in the Monitoring station tab. Here you can enter the customer code and 2 monitoring station phone numbers.

  • Page 10: Other Commands

    EasyCon GSM tellsystem.eu Other commands In the Functions/Monitor menu you may monitor and save GsM traffic. In case of defective operation, you should monitor error and send it in email to our technical assistant who will of service. In the Functions/Module status menu you may check module status.

  • Page 11: Ce Certificate

    EasyCon GSM tellsystem.eu CE certificate page 11. TellSystem Communication...

Table of Contents