Table Of Contents; Symbols Used In This Document; Definitions And Abbreviations; Applications - Grundfos CIU 850 Installation And Operating Instructions Manual

Modbus-grm-plc
Table of Contents

Advertisement

English (GB) Installation and operating instructions
Original installation and operating instructions
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.

1. Symbols used in this document

Warning
If these instructions are not observed, it
may lead to electric shock with consequent
risk of serious personal injury or death.
If these safety instructions are not
Caution
observed, it may result in malfunction or
damage to the equipment.
Notes or instructions that make the job
Note
easier and ensure safe operation.
2

2. Definitions and abbreviations

APN
Access Point Name
Page
CIU
Communication Interface Unit
2
CIU 850
CIU 850 Modbus-GRM-PLC
2
General Packet Radio Service.
GPRS
Technology for TCP/IP communication
2
and mobile Internet access.
3
GRM
Grundfos Remote Management
4
Hyper Text Transfer Protocol. The
4
HTTP
protocol commonly used to navigate
4
the World Wide Web.
4
4
LED
Light-emitting diode
5
Micro Secure Digital. A memory card
MicroSD
5
format.
5
A serial communications protocol
Modbus
5
commonly used in industry and
RTU
building automation systems.
5
Programmable Logic Computer
6
Central Processing Unit.
7
Transmission Control Protocol/Internet
7
TCP/IP
Protocol. Protocol for Internet
communication.

3. Applications

The CIU 850 is a gateway for connecting a Modbus
RTU/TCP network to Grundfos Remote
Management.
Grundfos Remote Management
Grundfos Remote Management is a web-based
solution for monitoring and control of networks. It
allows you to access information and control pumps
remotely using an ordinary computer or mobile
device. You must have a contract with Grundfos to
access GRM.
CIU 850 - Modbus RTU/TCP communication
The gateway functions as a Modbus RTU/TCP
master. It can be connected to Modbus RTU slave
devices via a wireless radio or wired (serial)
connection. A radio modem (SATELLINE-3AS or
similar) is required for wireless connection.
It can be connected to Modbus TCP slaves through a
external wireless 3G or 4G router or via an RJ45
connector to the network.
CIU 850 - GRM communication
The CIU 850 communicates with GRM via an HTTP
TCP/IP Ethernet connection. A connection and a
network router with Internet access or a wireless
modem (GPRS or similar) is required.

Advertisement

Table of Contents
loading

Table of Contents