Pvr Mode; Instant Recording; Schedule Recording; Timeshift Mode - Kogan 8 Series User Manual

INPUT

PVR MODE

NOTE
INPUT
• Don't connect or disconnect any USB device while in USB playback mode.
• Ensure all personal data is backed up before inserting USB device into TV.
INFO RECALL
We assume no liability for any loss of data due to malfunction or misuse.
• USB device should have capacity at least 512MB.
HOME
GUIDE
• USB device must support USB 2.0 high-speed specification.
• Use only USB storage devices formatted to FAT32.
Q.MENU MENU
• You cannot change channels while recording.
INFO RECALL
• If the signal is interrupted while recording, the recording will stop until signal is
regained.
HOME
GUIDE
• While in time-shift mode, do not turn TV off.
MENU
Q.MENU
Recording and Timeshift controls
INPUT BACK EXIT
enter
/
INFO RECALL
HOME
GUIDE
/
MENU
Q.MENU
BACK EXIT
BACK EXIT
/ II Play/Pause
SUBTITLE
SUBTITLE
Pg Dn Pg Dn
Recording
SUBTITLE
There are two types of recording: Instant Recording and Schedule Recording.
Instant recording can record current TV programmes, while schedule recording
Pg Dn
can be set to record TV programmes automatically on the day, time, and
duration you choose.

Instant recording

Select the channel you want, then press the / Stop/Record button on the
remote control to start recording. You will be prompted to confirm – press
to begin recording.
To hide the information bar at the bottom of the screen, press the / Stop/
Record once more.
Confirm / Play / Pause
Navigation / Skip backward & forward,
Hold to skip to start & end
Navigation
/ Stop/Record
Skip to start Skip to end
Skip backward Skip forward
To stop the recording, press / Stop/Record and then
prompted.

Schedule recording

Press the button to bring up the Electronic Program
guide
Guide. Use the notification buttons to select the desired
programme, and press the
a programme for recording.
You can schedule several items to record. Press the
Yellow colour button to view the list of currently
scheduled programmes. Different schedules should not
overlap and there must be at least a one-minute time gap
to set up between two schedules.
NOTE
Schedule recording still works when TV is in standby mode.

Timeshift mode

With the Timeshift turned on, you may pause and rewind normal TV viewing at
any time without missing any of the live broadcast. This can also allow you to
create a buffer and skip forward through commercials.
Press the / II Play/Pause button on the remote control while in DTV mode
to activate the Timeshift function. The TV stores the channel from the point
of view you want to record.
you left off. Press Stop to exit Timeshift mode. If a USB device dedicated to
recording is disconnected, Timeshift files that were saved will automatically be
deleted.
enter
enter
Red colour button to schedule
to resume from where
Press / II Play/Pause again
INFO RECALL
to confirm when
HOME
GUIDE
Q.MENU MENU
INPUT
INFO RECALL
HOME
GUIDE
Q.MENU MENU
BACK EXIT
BACK EXIT
SUBTITLE
Pg Dn
SUBTITLE
Pg Dn
15