End Of Programme; Your Machine Is Equipped With A "Standby Mode - Beko WTV 7502 B0 User Manual

Operating the product

5.17 End of programme

"End" appears on the display at the end of the
programme.
1. Wait until the loading door light illuminates
steadily.
2. Press On / Off button to switch off the machine.
3. Take out your laundry and close the loading
door. Your machine is ready for the next washing
cycle.
5.18 Your machine is equipped
with a "Standby Mode"
In case of not starting any programme or waiting
without making any other operation when the
machine is turned on by On/Off button and while
it is in selection step or if no other operation is
performed approximately 2 minutes after the
programme you selected has come to an end, your
machine will automatically switch to energy saving
mode. Brightness of indicator lights will decrease.
Also, if your product is equipped with a display
showing the programme duration, this display
will completely turn off. In case of rotating the
Programme Selection knob or pressing any button,
lights and display will restore to their previous
condition. Your selections made while exiting
the energy saving mode may change. Check the
appropriateness of your selections before starting
the programme. Readjust if necessary. This is not
a fault.
Washing Machine / User's Manual
67 / EN