Message Appears Prompting You To Reset Ink Levels - Epson ET-2720 User Manual

LCD code
(I-31)
(I-41)
(I-60)
Recovery Mode A firmware update has failed. Connect your product using a USB cable and try
Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.
During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD screen, or lights on the control panel will advise you when these parts need replacing. If this
happens during the standard warranty of the product, the exchange of the product or replacement of the
pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced
by any Epson authorized service provider. The waste ink pads are not a user-replaceable part.
Parent topic:
Related references
Where to Get Help
Related tasks
Checking for Software Updates
Related topics
Loading Paper
Solving Paper Problems
Wi-Fi Networking

Message Appears Prompting You to Reset Ink Levels

If you see a message on the LCD screen prompting you to reset the ink levels, do the following:
1. Refill all of the ink tanks or the ink tanks indicated on the LCD screen all the way to the top.
Condition/solution
To make wireless connection settings from your computer, run the installer and follow
the on-screen instructions.
The Paper Setup Auto Display option is disabled. You must enable Paper Setup
Auto Display to use AirPrint.
Your computer may not support WSD (Web Services for Devices). The Scan to PC
(WSD) function is available only for computers running English versions of Windows
10, Windows 8.x, Windows 7, or Windows Vista. Make sure your product is
connected correctly to the computer.
updating the firmware again. If you still receive this error message, contact Epson for
support.
Solving Problems
164