BANTE inststruments 210 Instruction Manual page 3

Bante210 Benchtop pH Meter
Display
The Bante210 pH meter is equipped with an easy-read LCD display that used to show the measured values and mode icons. The following table describes
the function of each icon.
INDEX:
Measurement mode icon:
Indicates the meter is in the measurement mode.
Calibration mode icon:
Indicates the meter is in the calibration mode.
Setup mode icon:
Indicates the meter is in the setting mode.
Keypad
The meter has a succinct membrane keypad, names and symbols describe the each function key controls.
KEY
MEAS|
MODE
CAL|
° C


ENTER
FUNCTION
• Switches the meter ON/OFF.
• Locks the measured value, press the key again to resume measuring.
• Exits the calibration or setting and returns to measurement.
• Toggles between pH and mV measurement modes.
• Starts calibration.
• Enters the setup menu (Press and hold the key for 3 seconds).
• Sets the temperature.
• Increase value or scroll up through the option.
• Decrease value or scroll down through the menu item.
• Confirms the calibration, settings or displayed options.
Electrode slope icon:
Indicates the average slope of the pH electrode.
Hold icon:
Indicates the measuring value has been locked.
Automatic Temperature Compensation:
Indicates the temperature compensation is enabled.
2