1. Manuals
  2. Brands
  3. Tando Manuals
  4. Accessories
  5. RTR-500GSM
  6. Introductory manual

Tando RTR-500GSM Introductory Manual

Mobile base station
Hide thumbs Also See for RTR-500GSM:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Introductory Manual
RTR500GSM_man_intro.indd
1
Mobile Base Station
RTR-500GSM
Introductory Manual
Thank you for purchasing our product. This manual
provides a brief explanation of how to set up and get
started with the RTR-500GSM.
Details about how to use the software "RTR-500GSM
for Windows" and its functions can be found in the
Software "Operation Guide (Help)".
© Copyright T&D Corporation. All rights reserved.
2013.03 16504550023 (4th Edition)
2013/04/19
15:48:31

Advertisement

Table of Contents
loading

Related Manuals for Tando RTR-500GSM

Summary of Contents for Tando RTR-500GSM

  • Page 1 Thank you for purchasing our product. This manual provides a brief explanation of how to set up and get started with the RTR-500GSM. Details about how to use the software "RTR-500GSM for Windows" and its functions can be found in the Software "Operation Guide (Help)".
  • Page 2 RTR500GSM_man_intro.indd 2013/04/19 15:48:31...

  • Page 3: Table Of Contents

    Connector -----------------------------------33 Getting Ready About External Power Sources -----------33 LED Display -------------------------- 34 Package Contents ------------------- 16 Tips for Placing the RTR-500GSM - 35 About SIM Cards ----------------------------16 FAQ's ---------------------------------- 36 RTR-500GSM Appearance Diagrams Q&A about RTR-500GSM -------------------36 and Part Names --------------------- 17 Q&A about SIM Cards and GSM -----------37...

  • Page 4: Introduction

    Notices Carefully read this manual so that you can properly use this product. T&D Corporation accepts no responsibility for any malfunction of and/or trouble with this product or with your computer that is caused by the improper handling of this product and will deem such trouble or malfunction as falling outside the conditions for free repair of the attached warranty.

  • Page 5: Software User Agreement

    T&D Corporation. Any inquires concerning commercial redistribution should be directed to the Sales Department of T&D Corporation. - Please do not attempt to make any changes or modifications to RTR-500GSM for Windows. Introduction RTR500GSM_man_intro.indd...

  • Page 6: Safety Precautions And Instructions

    Safety Precautions and Instructions Before using please read the following precautions and instructions. The following items should be strictly obeyed for the safe usage of the Unit, and for protecting yourself and other people from bodily harm and/or damage to property. Explanation of Symbols Explanation of Warning Symbols These entries are actions that absolutely under no...
  • Page 7 DANGER Power must be turned off before entering, and the Unit not used in any of the following places: Areas where explosive gas may be present including gas stations This may cause a fire or explosion. Areas where the use of the Unit has been prohibited including aircraft and hospitals, as the Unit may transmit signals that could interfere with aircraft or medical equipment.
  • Page 8 Make sure to periodically remove dust and dirt from the AC adaptor plug. If dust is allowed to accumulate on the plug, moisture may cause poor insulation and result in fire. Do not unplug the AC adaptor with wet hands. This may cause electrocution.
  • Page 9 CAUTION This product has been designed for private or industrial use only. It is not for use in situations where strict safety precautions are necessary such as in connection with medical equipment, whether directly or indirectly. Harmful gases or chemicals may cause corrosion and/or other danger to the Unit.
  • Page 10 To prevent damage to the Unit from static electricity, remove static electricity from your body by touching metal around you (door knob, window frame) before touching the Unit. Static electricity may cause not only damage to the Unit, but may cause breaks in or a loss of data.

  • Page 11: Notes And Precautions For Installing Wireless Communication Devices

    After having made an installation check the wireless signal strength. - The supplied software application includes a feature to check for wireless signal strength. In the RTR-500GSM Settings Utility in the "Wireless Route Settings" menu it is possible to check click signal strength.

  • Page 12: Wireless Regulations

    Compliance Information CE Statement This device complies with technical specifications required under EN 301 489 (with battery and AC Adaptor), EN 300-220, and EN 60950-1. Important Notice Wireless products cannot be used in countries other than where those products have been approved for use, according to that country's wireless regulations.

  • Page 13: Note About Sim Cards

    Notes about SIM Cards The SIM card stores the user’s cell phone number and other unique user identification information. Please take adequate care to prevent the loss or theft of your SIM card. Also, be sure to keep your PIN number in a safe place. Please note that this Introductory Manual has been written based on the presupposition that the functions / specifications of the SIM card being used and the details of the contract have already been confirmed between the user and the cell phone carrier.

  • Page 14: What Are Base Units, Remote Units And Repeaters

    What are Base Units, Remote Units and Repeaters? Base Units: RTR-500GSM A Base Unit can collect data measured by and recorded in Remote Units via wireless communication, and send the collected data either by FTP or e-mail to a server whereby the data can be downloaded to your computer via an external network, such as the Internet.

  • Page 15: Features Of Rtr-500Gsm

    Features of RTR-500GSM The RTR-500GSM has the following two built-in communication capabilities: Wireless Communication with Remote Units and GSM Mobile Data Communication. The GSM Mobile Data Communication capability makes it possible to carry out the following with temperature and humidity data received from wireless communication with Remote Units.

  • Page 16: Basic Procedures

    Install the USB device driver and confirm its usage Make Initial Settings for the RTR-500GSM - From the RTR-500GSM Settings Utility in the supplied software Get Remote Units ready to use - For details, see the Introductory Manual that accompanies the Remote Unit.

  • Page 17: Getting Ready

    Getting Ready This section provides instructions on getting the RTR-500GSM ready to use. RTR500GSM_man_intro.indd 2013/04/19 15:48:32...

  • Page 18: Package Contents

    Cable length 2m About SIM Cards Please purchase a SIM card separately from your cell phone carrier. RTR-500GSM can be used with any SIM card which complies with the following specifications: - Compatible with GSM (GSM 900 or GSM 1800)

  • Page 19: Rtr-500Gsm Appearance Diagrams And Part Names

    RTR-500GSM Appearance Diagrams and Part Names Front Back GSM Antenna Connector Antenna Local Wireless Antenna Connector Optical Communication Area LED (ERR / POWER / ALM) Battery Cover Right Side Left Side Unit : mm External Contact Output / Input Connector...

  • Page 20: Getting The Rtr-500Gsm Ready To Use

    Before installing the card, disconnect all cables (AC adaptor, USB cable and External power cable) that may be connected to the RTR-500GSM and make sure that wireless communication cannot occur. Be careful not to touch or scratch the IC area of the card.
  • Page 21 and lift off the cover. - Replace the battery cover to as it was when opened. SIM Card Holder 2-2. Lightly slide the cover of the Card Holder to the right to unlock 2-3. Slowly lift up the cover to its open position. Slide cover to the right Lift up cover (Unlock)
  • Page 22 2-4. Making sure that the IC (gold area) is facing out and toward the bottom insert the SIM card into the cover. Notch 2-5. Slowly close the cover. - If the cover does not close properly, make sure that the card is inserted correctly and try closing the cover again.

  • Page 23: About The Operation Switch

    Recorded Data", "Warning Monitoring" and "Automatic Sending of Current Readings" will become useable for the RTR-500GSM. STBY (Standby) When the switch is set to <STBY>, the RTR-500GSM will go into a low energy consumption mode whereby it will be impossible to use the functions listed above.
  • Page 24 4-2. If any of the three LED lamps come on or blink, the RTR- 500GSM has power. At this point, even if the <ERR> LED lamp comes on or blinks, it will turn off once all settings have been completed. (Green) (Orange) (Red)

  • Page 25: Installing The Software And The Usb Device Driver

    Installing the Software and the USB Device Driver This section outlines installation procedures and cautions by Windows OS. RTR500GSM_man_intro.indd 2013/04/19 15:48:34...

  • Page 26: Before Installing The Software

    Is Windows working properly? If Windows is not operating properly, the software may not be installed correctly or it may not operate properly. Make sure to check that the OS you are running and "RTR-500GSM for Windows"are compatible. Microsoft Windows 8 32/64bit...

  • Page 27: Rtr-500Gsm For Windows Installation Procedure

    * If you are using Windows 8, carry out the rest of the installation process on the “desktop” which can be accessed via a tile on the Start screen. Select “Install RTR-500GSM for Windows” and click the [Execute] button to start the installation. Click the...
  • Page 28 If a window appears such as the one below during installation, choose [Install] or [Continue Anyway]. 6. After installation, “RTR-500GSM for Windows” will appear in the Windows Start Screen or Start Menu. Installing the Software and the USB Device Driver RTR500GSM_man_intro.indd...

  • Page 29: Installing The Usb Device Driver

    Before connecting a Unit to a PC with a USB cable make sure to install the supplied software first. If the Base Unit is not an RTR-500GSM, please follow directions for installing the USB Device Drivers found in the Introductory Manual that came with the Base Unit you are using.

  • Page 30: Usb Driver For Windows Xp

    USB Driver for Windows XP If you are using Windows XP, the “Found New Hardware Wizard” window will automatically open when a USB device is connected. Please follow the directions to install the USB driver. Select “No, not this time”. Select “Install the software automatically (Recommended)”.

  • Page 31: Other

    Other RTR500GSM_man_intro.indd 2013/04/19 15:48:34...

  • Page 32: About Applications And The Operation Guide

    Launcher Window and Applications How to Open Open the “RTR-500GSM for Windows” from the Start Screen or Start Menu. Operation Guide: Launcher Window This provides detailed information related to the software in general, including "Basic Procedures" and "Troubleshooting". For details...

  • Page 33: Rtr-500Gsm Initial Settings

    Check the following before making initial settings Have the SIM card and batteries been installed correctly? Has the RTR-500GSM been connected with a USB cable to your computer? Is the Operation Switch on the RTR-500GSM set to <STBY>? Is the LED <Power> lamp (green) ON? Open the RTR-500GSM Settings Utility.

  • Page 34: Remote Units And Repeaters

    Remote Units and Repeaters The following outline shows the procedures for connecting a Remote Unit / a Repeater to the computer. Connecting a Remote Unit (Optical Communication) Open the software application. When the direction appears in the application window, connect the Base Unit with a USB communication cable to the computer.

  • Page 35: External Parts

    External Parts About the External Contact Output / Input Connector The following figure shows External Output / Input Terminals and the table shows its pin assignment. Please purchase a compatible connector and cable separately. * The JST Connector PAP-04V-S is compatible with this product. For all inquires and questions concerning sales of the connectors, please directly contact JST Mfg.

  • Page 36: Led Display

    LED Display The color and appearance of the lamps in the LED change to show the current status of the RTR-500GSM. When Operation Switch is in <Run> position Status Reason Blinking In “Run” mode Blinking During Wireless Communication or GSM...

  • Page 37: Tips For Placing The Rtr-500Gsm

    Tips for Placing the RTR-500GSM We strongly suggest setting the RTR-500GSM Unit up in a high, unobstructed position to enhance the radio signal strength. When positioning the Units try to keep the antennas away from objects or walls. Please carry out a *Signal Strength Test to check the radio signal strength before using the product and adjust the antenna direction accordingly.

  • Page 38: Faq's

    Q&A about RTR-500GSM Q1: Can this be used in any country in the world? The RTR-500GSM uses radio communication that is subject to local rules and regulations for the area in which it is being used. It is the responsibility of the user to make sure that the product complies with local rules and regulations before using it.

  • Page 39: Q&A About Sim Cards And Gsm

    Q5: Is it possible to change the batteries while the Unit is in operation? If the Unit is connected to an AC adaptor or some other external power source, it is possible to change the batteries. If the Unit is running only on battery power, first turn the operation switch to "STBY"...

  • Page 40: Product Specifications

    Product Specifications UNIT Compatible Devices Remote Units: RTR-501 / 502 / 503 / 505-TC / 505-Pt, RTR-501L / 502L / 503L / 505-TCL / 505-PtL Repeater: RTR-500 Features and 1. Auto-downloading of Recorded Data (E-mail or FTP), Functions 2. Automatic Sending of Current Readings (E-mail or FTP), 3.
  • Page 41 Short Range Wireless Communication RF Power Radio Standard ETSI EN 300-220 (869.7 to 870MHz) Specifications Transmission Range About 150m if direct and unobstructed Communication Time When downloading one Remote Unit at full storage capacity: About 2 minutes * The same amount of time will be necessary for each added Repeater. Cellular Phone Communication Network GSM900/GSM1800...

  • Page 42: Software (Rtr-500Gsm For Windows)

    Software (RTR-500GSM for Windows) Operating Environment Compatible OS Microsoft Windows 8 32/64bit (*2) (*1) Microsoft Windows 7 32/64bit Microsoft Windows Vista 32bit (SP1 or later) Microsoft Windows XP 32bit (SP3 or later) Display Languages English, Spanish, French, German, Italian (*3) *1: For installation, it is necessary to have Administrator (Computer Administrator) rights.

  • Page 43: Options

    Options Wall Attachment Type: TR-5GK1 O-Ring (rubber) x 1 Polyurethane Foam Aluminum Lock Screw x 2 Double-sided Adhesive tape x 1 Dimension (mm): W73 x H72 x D43 Screw Holes: 2 - 4.2 AC Adaptor Type: AD-05C1 Input: AC 100-240V Output:DC5V 2A Frequency:50/60Hz Cable Length:1.6m...
  • Page 44 Other RTR500GSM_man_intro.indd 2013/04/19 15:48:35...
  • Page 45 Other RTR500GSM_man_intro.indd 2013/04/19 15:48:35...
  • Page 46 Other RTR500GSM_man_intro.indd 2013/04/19 15:48:35...
  • Page 47 A list of distributors can be found at: http://www.tandd.com/about_tandd/contactus/ Product Information Product information can be found at: http://www.tandd.com/product/ Mobile Base Station RTR-500GSM Introductory Manual T&D CORPORATION 817-1 Shimadachi, Matsumoto, Nagano 390-0852, Japan Website : http://www.tandd.com/ FAX : +81-263-40-3152 E-mail : support@tandd.com ©...
  • Page 48 Mobile Base Station RTR-500GSM Warranty Provisions for Free Repair 1 year from date of purchase Warranty Period The warranty is contained in the User’s Manual (English) included in the package. When seeking repair, please make sure to fill in all required fields and present it.

Table of Contents