Breville Handy Mix & Store LHM150 Instruction Book page 11

ASSEMBLY OF THE DOUGH HOOKS
WARNING
Ensure the hand mixer is switched off and
unplugged from the power outlet before
attaching the dough hooks to the mixer.
WARNING
Dough hooks must be inserted into the correct
sockets as they are not interchangeable.
Incorrect insertion will result in the dough
hooks falling out during operation and cause
damage.
1. Insert the left dough hook shaft into the left
attachment socket under the mixer motor
body.
2. Firmly push the dough hook into the socket
until it locks into place. Repeat for the right
dough hook into the right attachment
socket.
Left
Right
10
NOTE
Always ensure the dough hooks are firmly
positioned before operating.
WARNING
Never use a dough hook with a beater as this
may damage your hand mixer.
REMOVING BEATERS OR DOUGH
HOOKS
1. Sit the hand mixer upright on a flat surface
with the beaters/dough hooks facing away
from you.
2. Press the EJECT button to automatically
release the beaters/dough hooks from the
sockets. Grasp the beaters/dough hooks by
the shafts, being careful as they may be hot
after use.
NOTE
The beaters/dough hooks will be released
automatically. Do not force the beaters/dough
hooks out of the sockets.