Advertisement
Quick Links
Advertisement
Related Manuals for KNX TH65-AP
Summary of Contents for KNX TH65-AP
- Page 1 KNX TH65-AP Thermo-Hygrometer Technical specifications and installation instructions Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D – 75391 Gechingen Phone +49 (0) 70 56 / 93 97-0 info@elsner-elektronik.de Germany +49 (0) 70 56 / 93 97-20 www.elsner-elektronik.de...
-
Page 2: Technical Specifications
Operation -30…+85°C, Storage -55…+125°C Operating voltage KNX bus voltage Bus current max. 5,5 mA, max. 9 mA when programming LED is active Data output KNX +/- bus terminal plug Thermo-Hygrometer KNX TH65-AP • Date of issue: 29.03.2012 • Technical changes reserved. Errors reserved. -
Page 3: Installation And Commissioning
The device is exclusively intended for appropriate use. With each inappropriate change or non-observance of the instructions for use, any warranty or guarantee claim will be void. Thermo-Hygrometer KNX TH65-AP • Date of issue: 29.03.2012 • Technical changes reserved. Errors reserved. - Page 4 For outdoor installation it must be ensured that a 60 cm gap is left below the sensor in order to prevent it from being snowed during snowfall. The sensor must be mounted vertically. The measurement probe and the cable outlet must point downwards. Thermo-Hygrometer KNX TH65-AP • Date of issue: 29.03.2012 • Technical changes reserved. Errors reserved.
-
Page 5: Mounting And Connection
After the bus voltage has been applied, the device will enter an initialisation phase las- ting 5 seconds. During this phase no information can be received via the bus. Thermo-Hygrometer KNX TH65-AP • Date of issue: 29.03.2012 • Technical changes reserved. Errors reserved. -
Page 6: Maintenance
As a precaution, the device should always be separated from bus current for maintenance works. Thermo-Hygrometer KNX TH65-AP • Date of issue: 29.03.2012 • Technical changes reserved. Errors reserved.